hi does anyone know what the best solder I should use to install a enigmah modchip into my xbox, and could you please post the link or refrence number from radioshack.com website thats where im gona order it from but there are so many to choose from and im not sure which one I should get becuase when I installed my ps and ps2 modchips the solder came with the chip.
thanks

you can use any 60/40 rosin core solder like this http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F005%5F006%5F001%5F000&product%5Fid=64%2D009 or clear flux solder like this http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F005%5F006%5F001%5F000&product%5Fid=64%2D018 You might also want to pick up a desoldering braid http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F005%5F006%5F001%5F000&product%5Fid=64%2D2090

when i did my enigmah i used normal solder u can buy in most electronic stores buy ready fluxed if they have it as this makes it a bit easier for the solder to bind, the only stuff u should not use is plumbers solder as this stuff can ruin your tracks on the mainboard.theres a lot of talk about buying expensive solder paste etc but as long as u have a steady hand and follow the diagrams have a go
nick.............

It kind of hard to install 29 wires.

ok thanks im gonna get the clear flux solder