I have just read on another site some technical specs on the inside of the Xbox and the Bios can be bypassed by altering the state of 1 of its pins!

So i reckon the new Xcuter chip is a clip to fit over the old bios ( No solder) and then 1 wire to bypass the old bios?

Im very stoned but this makes so much sense to me right now!

Never, Ever, Ever, Ever eat yellow snow.

CO

that would make sense. i guess we'll just have to wait and see when and if the modchip comes out.

Thats probably what it will do, use a Bios clip, like the Neo 4.5 and the Messiah for PS2. I don't think just 1 wire and nothing else can overcome M$ box.

Maybe its just me, but it doesn't make sense that this chip is for real. Don't you need AT LEAST 2 wires for ANY chip? (ie, 1 for ground, the other for voltage?). How can you make an electrical circuit with 1 wire?

both ends of the wire have to be soldered possibly, as in a link wire!

I think that what happens is one wire drags a pin low or high state, this causes the original bios to be ignored and then the 'new' bios image kicks in attached by a clip.

Fantasy or reality, i dont know im just me.

CO

where did u find that info? and what do u mean by "Never, Ever, Ever, Ever eat yellow snow"? have u done that before and had bad experience?

yellow snow rules

the 1 wire mod is a reality check here
http://www.x-ecuter.com/
xbox sales will go ballistic once anybody and everybody can fit the chip

DCFisherman, Nevr, Ever listen to me, i try to be helpful but most of the time i just dream up stuff in a state of complete confusion.

CO

I am waiting for this chip, it's supposed to be cheap and easy to fit. Hope it's real.

No chip will ever help hardware sales significantly. That is a common misconception. The vast majority of people, especially here in the US, will never know. As for this chip, I hope it comes out soon but dont hold your breath...


ash =o)

iso, I don't know if you noticed on that site but it says:

"This project is for fun only."