hi,
after these drivers,
been on dexxa site, and they say they dont exsist,
is there no way of runnin my old dexxa scanner under windows XP

thanks for ur time
bungle123

I've heard that Dexxa scanner division was acquired by another company and there would be no supports for Dexxa scanners.

Well, if yours is model 4800, check to see if these drivers (http://marvin.tele-net.net/storm/xxx_drivers.htm#dexxa4800) will help.

many thanks mate,
will download em now,
been lookin for ages for them. didnt think to ask on here,

very greatful for ur help,

fingers crossed they work
ta
bungle123

I don't own any Dexxa so I don't know how many models it had. If yours is a 4800, I believe those drivers would work. Otherwise, post back with your model #.

hi nuget,
tried to get going but not having much luck,
downloaded the file,
tried to install new hardware through XP, but it comes up
the specified location does not contain information about your hardware,

you got any ideas mate?
ta
bungle123

It may mean yours is not a 4800. Can you get the model # from it?

yeah matey
its a dexxa flatbed scanner "4800"

bungle123

Let me download the file and take a look.

OK, I just donloaded it and decompress this self-extracting file to a temp folder on my HD. I see it has a setup.exe so I would connect the 4800 to the PC, make sure all connections are properly connected, and run the setup.exe file.

get this comming up mate

The EId file cannot be found. please make sur that the disk is placed prperly in the drive

any ideas?

thanks for ur help with this, im very greatful
bungle123

Did you get the error during installation? I installed the driver OK but only got error scanner not found (of course :laugh: ).

Try the older version on same link above.

thanks mate, sorry for late reply, will give the older version a try.

ta
bungle123