I have the Final Enigmah which requires the small fix, and I wish to disable the mod temporarly so I can flash my bios. But I am not sure which 2 wires to disconnect because in the tutorials it says to disconnect 15 and 21 but i presume that is for the final enigmah V2 which doesn't need the fix. And the points of the 2 diff chips are different.

So could someone please tell me which 2 wires I need to disconnect to disable my Enigmah Final which had the mistake on the PCB?

Thanks

I don't know, but you could look at the diagrams for both and see for yourself. That way you know the info is correct.

Thanks, but I guessed, I cut 7, 15 and 21 and it flashed perfectly!

Cut 15 & 21.
This applies to enigmah modchips.
Both beta and final.

Instead of cutting the wires I added switches and after flashing the bios I removed the chip all together.

If your planning on cutting the wires I suggest you cut wire 21 then cut wire 15. Not at the same time. I've heard people experienced shorts when you cut both wires at the same time.

Which wires would you cut to disable an Enigmah beta? Thanks

Originally posted by mwaytena
Which wires would you cut to disable an Enigmah beta? Thanks

if you want to be on the safe side - all of them!