I just in the excuter on my new xbox the install look good but

I cant get it to boot X dashboard cdrw I have no backup to try but my

original work. I burnt it with Prassi PrimoDVD 2.0 on a maxell cdrw 74min at

4x...no go, do I need to other dvd drives to boot it. On

xbox scene.com tutorials it said he hook up two drive to boot it. please help

ur xbox might not like that media

-make sure 'default.xbe' is in the root directory on the CDrw.
-copying method is in Mode1, UDF and DAO(closed).

Originally posted by redwolf
-make sure 'default.xbe' is in the root directory on the CDrw.
-copying method is in Mode1, UDF and DAO(closed).

EvoX is an .ISO, those rules dont apply to the .ISO format

peace

Cal_G

try putting in the disc and when you boot up and get the error screen press eject and when it comes out press eject and send it back in,wait a few secs and if nothing happens power off with the disc inside and power it back up try that a few times it worked for me.

ur xbox might not like that media



your right I just burnt in on a dvdr and I booted

thanks

I've only been able to get the util to work on a DVDR and not a CDRW.

In prassi click on the third icon from the right which is I believe iso/ other image. Go to recording options and choose mode1 dao closed. Load your iso and burn at 1 or 2x. you should be good to go unless your install was bad.

also, if you have a bad menu.ini file on your xbox it won't let you boot anything either.

in that case you must burn evox with the default menu.ini in the root dir.
then replace your menu.ini file with a working one