TheBrooster
Sep 20, 2002, 09:03 AM
Once I have installed my Xecuter into my xbox, with a switch to disable, can I use Evo X dash to reflash my xboxs' own bios then turn the Xecuter off.
TheBrooster
TheBrooster
![]() |
View Full Version : Question for the experts, or the curious.
|
TheBrooster Sep 20, 2002, 09:03 AM Once I have installed my Xecuter into my xbox, with a switch to disable, can I use Evo X dash to reflash my xboxs' own bios then turn the Xecuter off. TheBrooster mitsu50 Sep 20, 2002, 10:53 AM Originally posted by TheBrooster Once I have installed my Xecuter into my xbox, with a switch to disable, can I use Evo X dash to reflash my xboxs' own bios then turn the Xecuter off. TheBrooster the answer is no. you cannot flash the xbox bios using the x-ecuter. Supposedly you will be able to flash update the bios on the new version of the x-ecuter. whats nice about this chip is you dont alter the M$ bios at all, and with the switch you can swap between the 2 romps Sep 20, 2002, 02:29 PM yes u can flash your internal bios with it first make sure u bridge the points on m0b0 see what bios chip it is if u got the new evox dash on 2594 it will flash any internal bios if its the older evodash u got and it will only flash st bios then u need a prog to flash it but basicly when all set up to flash and it says press start to flash turn of xecuter and then flash and u can then remove the modchip but more to the point why bother ? if i was u i would get an openxbox or make ya own homebrew mod or if xecuter is doing what it says wait for that |