i cant get this game to boot, ive got a no-solder mod

If you can't get it to boot I have to tell you you're not missing much. It is a sad excuse for a game... Try a reburn at a slower speed and see what you come up with but it's really not even worth that.... :(

i might give it a miss , thanks mate :)

me2 im using knife trick and it just spins.i burned it in 1x and 4x and 8x still wont work

I download it and burn it... WORKING... I have v7 with no solder + swap magic.

how fast did u burn it and what program did u use?

I used Nero and 4x... you must use MODE 2/XA if that's your problem

Knowing this game isn't so hot, I burned it at 20x on Verbatim media. Booted just fine on a v7 apple mod. Just like I expected, the game wasn't so hot..

EA Patch it

I've got a problem with it. Burned it , got it to boot, however you just get into the game and it freezes. EA patched it and burned it again, same exact thing. I have to boot it with Game Shark "codes on"to get that far. Sounds like I'm not missing much though.

PS2ver.2 Neokey

i can get it to boot just fine with a GS 1.93, but it will not boot with any other version of GS. Any ideas? I don't like the game but my buddy likes it a lot and only has a GS v2.x.

Here is the trick that can make it to work. I only test on neokey with GS so I don't know any other mod chip would work.

1. First load your GS, make sure doggle is placed.
2. Select any game codes but uncheck all the codes.
3. boot your game with GS codes.

And now Rally fusion should boot. I use GS1.99d

i have 2 ps2's 1 is a v4 with neo2.2 with action replay and rally fusion didnt boot but it boots on my v7 with magic2