kzeitler
Jan 12, 2003, 04:11 AM
how do i tell what firmware my 104 is using. i think i flashed it to 1.40 but it still wont burn ritek at 2x. i tried flashing again and i get a error. any ideas
|
View Full Version : ritek 2x not burning on my pioneer
|
kzeitler Jan 12, 2003, 04:11 AM how do i tell what firmware my 104 is using. i think i flashed it to 1.40 but it still wont burn ritek at 2x. i tried flashing again and i get a error. any ideas anton.bothe Jan 12, 2003, 06:05 AM Check the batch number of the ritek. It has to be bach 02. I have some 03 and they only allow to burn at 1x MR2-UK Jan 12, 2003, 09:53 AM If it's the official 1.40 you might have to go back to something else then upgrade to the hacked 1.40. Look here http://www.firmwares.co.uk/ there should be something to help you. kzeitler Jan 12, 2003, 02:55 PM they burn fine at 2x in my duplicator just not on my computer. i used verbatim on this drive and they burn great at 2x whizzersmith Jan 12, 2003, 06:23 PM I agree with anton.bothe as i just got some more trax data (purple)and they have 02 as the batch code and dont like burning at 2x :( newdurango Jan 13, 2003, 10:29 AM I have been having the same problem. The number printed on the center of the disk is H032991131811. What batch is this? Does it tell you what speed in that number as well? cyanideg33 Jan 16, 2003, 06:19 PM you guys should check the actual lead in data on the DVD's using: ADVDinfo pick it up anywhere on the web, It's freeware. it will tell you what brand discs they are. Those Riteks you think you have may actually be leadtek, not Ritek. CDDVDRmedia.com, and meritline.com have been pulling this scam for a while!!! Xtreme2003 Jan 16, 2003, 06:27 PM Originally posted by cyanideg33 you guys should check the actual lead in data on the DVD's using: ADVDinfo pick it up anywhere on the web, It's freeware. it will tell you what brand discs they are. Those Riteks you think you have may actually be leadtek, not Ritek. CDDVDRmedia.com, and meritline.com have been pulling this scam for a while!!! the latest dvddecryptor will show you this info! in ISOMode :tup: http://www.webspawner.com/users/viperclaw/Capture_01172003_003125.jpg The DVD-R's are White Labels no need for ADVDInfo alot of peeps having problems whit this and downl the Firmwarechecker on firmwares.co.uk :beer: whizzersmith Jan 16, 2003, 07:09 PM my traxdata (purple) info look like this Device Information: Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,298,496 Free Space: 4,707,319,808 bytes Free Time: 510:48:46 (MM:SS:FF) Pre-recorded Information: Manufacturer ID: RITEKG03 Physical Format Information: Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track |