pioneer oem 105 , just about to buy one , could anybody help with fitting etc info reqd ,also what cable needed? wheres the best place to buy everything pls mail

if your in the uk..

http://www.blankdiscshop.co.uk/acatalog/catalogbody.html

depends whats in your pc all ready,

just set the jumper on the back according to where to place it on the IDE cable.

if you put it on the middle connector, which is slave, then set the jumper to slave.

or if you connect it to the further connector from the motherboard, which is master, then set jumper to master.

i have my 105 as slave on primary IDE channel. my HD with OS is on the master.

Originally posted by allhours
pioneer oem 105 , just about to buy one , could anybody help with fitting etc info reqd ,also what cable needed? wheres the best place to buy everything pls mail

Chances are you wont need to purchase an IDE cable or power cable as your PC should have an extra spot on the IDE cable and a second power cable that is currently in your PC. The only thing you should have to get ahold of is software. If you need help with the install E-mail me and I will walk you through it. It's pretty easy and I'm not that experienced with computer installs.