hi , having a problem with coping disc to disc using my Pioneer dvdrw. I am using Stomp record now and it works fine if I only use the dvdrw to copy onto hard drive then back ono the dvdrw drive. seems as thro it is not recogniing my Atapi Dvd- rom 16x. when I try and burn disc to disc using these two drives I get an error message stating"
" disc to disc copy Untitledterminated with errors.
error - 10 at sector 0 - command15 sense05 ASC25. ASCQ:00.

Does anyone have any idea what this error message is tellin me.

Any help will be much appreciated.

Bubbers

Can you read from the DVD-ROM to the hard drive?

Originally posted by Bubbers
hi , having a problem with coping disc to disc using my Pioneer dvdrw. I am using Stomp Instant Copy and it works fine if I only use the dvdrw to copy onto hard drive then back ono the dvdrw drive. seems as thro it is not recogniing my Atapi Dvd- rom 16x. when I try and burn disc to disc using these two drives I get an error message stating"
" disc to disc copy Untitledterminated with errors.
error - 10 at sector 0 - command15 sense05 ASC25. ASCQ:00.

Does anyone have any idea what this error message is tellin me.

Any help will be much appreciated.

Bubbers

And people wonder why so many of us don't recommend burning on the fly.:rolleyes: It is far more demanding on your PC's resources than when you read it to the HD first. As mentioned above try reading it to the HD with your Atapi DVD-ROM.

thanx for replies lads, my atapi dvd om will not read to the hard drive.it tries to copy for up to 1% then tells me that
" there was a problem reading the source disc during the copy process. please make sure disc is free of fingerprints, scratches or dust then try again."

there is none of these on the discs I am trying to copy and have tried several different discs.

Bubbers

Could be on its way out or may need cleaning. Try a lense cleaner on the laser first.

its only approx 7 months old and as not hada lot of action but will try mate

cheers phil

bubbers

just do copy from same drive, it extracts the contents to an iso, then u switch from original dvd to the blank one, then it burns the iso to the dvd-r.

i have similar problem, but i just builkt pc and drives were brand new.
can copy to hard drive, but when i try with normal reader , theres no disc there (apparently)

but if im out of nero i can use the drive and it reads everything


any suggestions?

axor
i can do this using my dvd recorder drive but I am trying to bypass the time scale of copying the orginal and then insert a blank to copy it from the iso using the same drive.

cheers
Bubbers

Is it really worth it to save that little time if you are having these problems? It's not like CD burning where you can get away with burning on the fly with minimal fuss. How are your drives configured? (which one is slave and which one is master?) Also what are the specs of your computer?

Jest, all I am trying to do is burn quicker, my drives have been swopped around from master / slave to get best set up but same happens . Currently my drives are set up to the same as my mates and he can copy disc to disc no problem. My pc has more spec than his, pent 4 ,2.6with 512 mem and 120 hd. It is telling me that poss, there is a conflict with my dvd rom . What do you think

Thanks for reply

Bubbers

What make is the dvdrom? And have you tried ripping one of the movies your unable to copy to the HD using smartripper or dvd decrypter? For what youve explained in your posts so far it sounds like the dvdrom is on its way out. Best way to test this is use smartripper etc, If it fails try cleaning the drive with a disc cleaner before writing it off.

[QUOTE]Originally posted by Bubbers
sense05 ASC25. ASCQ:00.

Does anyone have any idea what this error message is tellin me.

Any help will be much appreciated.

does rnm show support for your reading dvdrom drive in the drive window?????
according to trouble shooting, code errors, in help menu:-
5-25-00 = logical drive not supported.
1 option is use alc. 120% with your recorder, take an image, and burn that.