Hi all,

Wondering if anyone can help me, 1st I did my xbox way back I installed a xecuter II lite which came pre flashed (the good old days), Then I did another xbox with a slioghtly newer verision of Xecuter II lite (2.1) which I flashed by makeing up a disk with bios.bin and dumby file (100mb) on it I put disc in this xbox and it flashed bios automatically when I turned xbox.

Bu Now I have bought and installed an even newer version of xecuter II 2.2 Lite I think and when I boot xbox up it says something about linux bios and it is looking for linux boot.cfg on a disc.

What the hell do I do here? Any help would me much apreciated I just wanna getthis xbox up and running to play backups.

CHeers

Jacks

This happened to me today with same chip, gave it to a friend, and he had same problem, i 'm stumped as well.

Just emailed simply mods where i got the chip from, they said

To keep themselves (team executer) away from
any legal problems they started to use the Legal Cromwell Linux Bios which
requires re-flashing by the end user after installation (or before
installation if you have the external programmer).
With the unit installed and activated, the cd tray should open and you
should see a Cromwell Screen advining to insert a update cd.
If you only have a black screen with the Xecuter 2.2 enabled, then you
should use the AV cable as supplied with the xbox console.

yeh but what need to be on the disk, I tried the bios.bin and dummy file and it did not work ?

CHeers

Jacks

anyone any idea how I reflash this using disc ?

Cheers

Jacks

name it BIOS.BIN (note the CAPS LOCK)
take your dummy file whatever it is, and name it ABC.DAT (again note the caps) see if that works :tup:

ah ok cheers, just another quick one why does it keep saying that its looking for linux boot.cfg ?

CHeers

Jacks

when you turn the xbox on. it doesn't open the drive and ask for bios update cd?
if it's different, you got stuck with cromwell instead of the flash(bios)
www.ozxchip.com downlaod the ozxflash iso