CDROM-Guide forums  

PDA

View Full Version : My CD-RW wont burn at speed stated.


   
lalaji
Nov 11, 2003, 07:42 PM
Hey guys... i hope you can help me with this. I have a Sony CRX225E CD-RW. Its a 52x24x52 drive... The problem is every time i try to burn a cd, be it iso or just a disc of mp3's it takes at least 7 minutes at 52x. This is definitely not burning at 52x. Ive tried this with 48X CD-Rs and all different types of burns (CD Audio, mp3s, iso, movies) and no matter what it takes at least 7 min. This happens even when i try it at 48X... still at least 7 min. I use Nero 6.0.0.11 as my software and i have an Athlon XP 2500+, Asus A7N8X Del, 1GB of PC2700 Ram, Win2kpro, and my cd drives are on the other IDE channel than the hard drives. I looked for firmware updates on Sonys site but i didnt find any. If you guys have any ideas why this is happening or have had this happen and know a fix any info would be greatly appreciated. Thanks.
-Lalaji

TierraDelFuego
Nov 12, 2003, 03:13 AM
Well it sounds like an IDE driver problem. Have you installed the latest nForce2 chipset drivers from http://www.nvidia.com/content/drivers/drivers.asp as these will help with the speed of the IDE controllers. I used to have loads of problems wih VIA chipset mobo's doing exactly the same.

HTH, T.

lalaji
Nov 12, 2003, 10:54 AM
Ill try updating and let you know what happens. Thanks for the advice.

lalaji
Nov 12, 2003, 03:55 PM
Ok so I updated my drivers and now shes burnin like a pro. Burned a 744MB Bin file in 2:25. Thanks for all your help!

TierraDelFuego
Nov 12, 2003, 04:24 PM
no worries m8 :)

remember, drivers are for life, not just for xmas