i just chipped my v5 xbox but when i hold the power button for 1 or 2 sec the light goes red then yellow, its ment to go red, yellow, green. the games work when the light is yellow but if i play it for 30 to 60 mins then turn it off and back on it only goes red then when i release the button it goes green no yellow and the dvdr games wont load. i have to leave it off for hours before it will work again, i have the slayer 2.5 installed i dont no if it worked before it was installed, and i changed the chip still same what could be the problem and how do i remove the slayer
Thanks

I would check all installation, and basically remove the chip completely and then re- install it again, it sounds like either 1. The chip is bad, or 2. the install is bad, and some of the points are cross connecting.