I've recently installed two executer 2.3b +. One of them is working fine. The other one was working then stopped. I had flashed it with 4980 bios installed evox and it was working fine for two days. It stopped working so I opened it up and realined the chip again and it worked for about an hour then it stopped again. The box wasn't moved so Im guessing the pogos are just slipping off somehow. This time when I realined the chip I turned the machine on and it shut off then it turned on and shut off then it stayed on but the eject button is flashing green and red. I did a search about this and it is called fragging, but I also don't get any picture or sound at all on my TV and my AV is plugged in. Before when the chip wouldn't work I would just get the Xbox Screen and nothing else. The three lights are on when the chip is disabled and the two blue ones are on when the chip is enabled. I have tried lining it up for the last 4 hours and still nothing any help would be great. It's a version 1.2 - 1.5 box and the switch is in the right spot.
Thanks