potuk
Oct 18, 2004, 06:51 AM
just modded my xbox with xecueter 2.6 lite . booted up comes up flashbios 2.6.0 . and im new to this
ok so i need to flash with latest bios . Been on relevant sites tutorials regarding this subject but because the xbox is the new crystal vi.6 your limited on help with bios . Any one come across this problem and could share links to relevant sites on this subject.
cheers
madog30
Oct 21, 2004, 05:44 PM
just modded my xbox with xecueter 2.6 lite . booted up comes up flashbios 2.6.0 . and im new to this
ok so i need to flash with latest bios . Been on relevant sites tutorials regarding this subject but because the xbox is the new crystal vi.6 your limited on help with bios . Any one come across this problem and could share links to relevant sites on this subject.
cheers
you flash it the same, it's only the chip install is diffrent! (need link wire's)
aikon1
Oct 29, 2004, 06:28 AM
You need to flash the bios with the M8_16 BIOS , this is the only one that will work, so do not try anything else. Cannot tell you where to get it, try a search on google. The last post is almost correct, there are extra wires to install. 4 are link wires, and a couple of extra's from the chip (for LAN & HDD operation LED's on the switch bank).
This is all of course assuming that your chrystal xbox is a 1.6 (most are - but check first), and that you are using a xecuter 2.6 mod.
Once you have done this get a copy of slayers auto install v2.6. This will install your evox dashboard and some good appz to fully unlock your box. Check slayers web site for install and usage manual.
Good luck. :wavey:
