I am trying to use Clone cd to burn karaoke and graphics to a cdr. Have only been successful in burning only one song and graphics to the cdr. I have a NEC 7800a cdr burner and have to use Clone cd as I understand it from the Karaoke Playground . The programs I have are the shareware versions of CDRWIN, Clone CD, MP3+G Toolz, and I have Karaoke for direct x running. How do I put more than one song plus graphics on a cdr using these programs? Or is there another program I can get that will do this? I have been getting my songs from mIRC and converting them from .bin files then to .cue to .ccd and burning the song with Clone cd to cdr. Just cant figure out how to burn more than one song to cdr. Please email any suggestions to me.

You need to keep the files in bin format.

Use Record Disk in CDRWin. Check all applicable settings.

Click on Load Tracks. Make sure CD+G is checked.

Click Add. Browse to where your bin files are located.

Add bin files. Depending on size, you should be able to burn 15-20 on a CDR.

Click OK

Check all applicable burning settings.

Click on Start Recording

When finished, click on OK.

Your multi-track CD+G disk is complete!

For more indepth details, go to:

www.goldenhawk.com

In the download section, download the User's Manual.

Read Chapter 9 "Creating A CD+G Disk".

Ok tried what you said, but it didnt work as I got -- Error: "Start DAO Recording" command failed on device. CUE Sheet was rejected by CDROM recorder.-- My Cd-r burner supports writing of CD+G RAW-SAO and can read audio discs and subcode info, but cannot read CD+G discs. That is why I had to use Clone CD to burn to my CD-R. So how can I use Clone CD to burn more than one song to disc?

:luxhello: Ok guys I finally figured it out for myself. For those that would like to know: Using MP3+G Program Take the .bin file and convert to a .zip and have it placed in lets say folder "A". Do the same for each additional song (.bin) sending them to folder "A".

When you have about 20 songs or less (depending on the file sizes) Use MP3+G program to convert folder "A" back to .bin so that all the songs are one big .bin and .cue file.

Now switch to CUEtoCCD Program and convert The .cue file in folder"A" to a .ccd in a new folder we will call folder"B".

Now switch to Clone CD to burn your new Karaoke cd from folder "B".

Hope this helps someone else!

Yup...

And step by step instructions are here:

http://www.karaokeplayground.co.uk/help/burnmp3g-clonecd/burnmp3g-clonecd.htm

:)