X_calibur
Apr 08, 2002, 10:41 PM
i have a neo 2
v4 ps2
any reasons why it is like this?
v4 ps2
any reasons why it is like this?
![]() |
View Full Version : Why is my Ps2 boot rate around 70%
|
X_calibur Apr 08, 2002, 10:41 PM i have a neo 2 v4 ps2 any reasons why it is like this? Berns Apr 08, 2002, 11:03 PM buy a laser cleaner, that might do the trick. Luxor Apr 08, 2002, 11:17 PM :tup: 100% here I also have a neo 2.2 What I do is when gameshark say Insert Disc I insert the disk ---->close the cd tray and tell everyone to shut up and then I listen really close for -a "loading sound" usuall 4-5 sec after the insert of the disc --then I press X on the controller really quick ---and this works 100% percent of the time ****Hey Does anyone know that Techno/Trance song featured in commercial for Mitsubushi Eclipse 2003 KiflomK@hotmail.com:tup: wip3outnz Apr 08, 2002, 11:54 PM The neo 2 was an earlier chip which wasn't as good as the neo2.2 but still the neo2.2 does boot if there is dust on the disc.It doesn't take much to not boot, so make sure that the disc's are dust free. funkipk Apr 09, 2002, 05:54 AM Can anyone explain why the gs/dvdx has to be put in the ps2 and then switched of for 5 sec before rebooting? Just wondering. p2user Apr 09, 2002, 07:23 AM I had neo 2 and had crap success rate, just get a neo 2.2 and the cap aswell since the pin layouts are the same just unsolder one leg at a time and solder it back to the new chip and then yoru success rate for loading games will be much more better. I was a sceptical before it does make a hell of a difference. Also the neo2.2 chip itself and the cap is dead cheap!!! X_calibur Apr 09, 2002, 07:15 PM i thought neo2 had the same sucess rate as neo 2.2 X_calibur Apr 10, 2002, 12:01 AM :tup: wip3outnz Apr 10, 2002, 12:57 AM Originally posted by funkipk Can anyone explain why the gs/dvdx has to be put in the ps2 and then switched of for 5 sec before rebooting? Just wondering. I guess it the same as a computer. You turn it off and on if it's playing up to clear the problem. I know I'm right but I could be wrong. Wip3outnz w3dal Apr 10, 2002, 07:10 AM Hi, The NEO2 mod was very unreliable for booting backups which was why the NEO2.2 was created. You only have to power off the system when your booting a EA Sports backup. This switches the chip to EA mode. Cheers Dal oOlegionOo Apr 10, 2002, 07:32 AM with neo 2 there is a timing issue i used to always wait for the blue light to stop flashing then i hit x. with neo2.2 you dont need to do this PS are you switching on your ps2 by pushing the reset button or the eject button. If you push eject button to switch on ps2, it switches off your chip. Try it ! PS2ModChip Apr 10, 2002, 12:46 PM I tell everyone to shut up whenever that Mitsubushi commercial comes on! BTW, its called Start The Comotion by The Wiseguys. And I also boot the same way, with my ear on the ps2! downlo85 Apr 10, 2002, 03:56 PM the 5sec power off is probably just to make sure you get a proper/full hardware reset (make sure everything discharges). so you don't HAVE to wait 5 sec (i never do), but its more of a "just in case", especially if you're having problems. Luxor Apr 10, 2002, 05:40 PM Thanks PS2Modchip someone finally replied downloading it right now 10 minutes latter oh wrong song I'm talking about the song where the puerto rican girl is doing the robot like moves in the girl and her boyfriend is a black guy looking at her as he drives thanks though :tup::tup: 20 min later found it 2003 Mitsubishi Eclipse re-mix - Dirty Vegas -Days Go By naughty703 Apr 11, 2002, 06:00 AM juz after u put in the cd-r copy and close the tray, try press the 'start' button after u press the 'x' button if the screen stay black only. it works on my ps2, if some of the game doesn't boot.:) |