This may be useful to people who get sick of holding down the reset button to load dvdrs. All you need is some scotch tape, and a piece of paper!!! Use part of a piece of paper and fold it into a small square shape like a size of a jelly been. Make sure it has are least ¼ of inch in thickness. Now get a long piece of tape and fold two of the ends inch in of each other. Now place the square on the middle of the tape. Make sure it is sticking to the tape, now put another piece of tape on the other side of the square so there is nothing sticky around the square. Now simply apply the sticky part of the tape under the open button and press against it to make sure it has a good grip on the bottom, then when ready to play a dvdr put the gameshark in the system, and turn it off. Then start the system, and they light should be red and tightly put the tape over the reset button (on top of the system) (make sure the square is touching the reset button) then press the tape against the top of the machine so the square is pushing against the reset button, then make sure the square piece of paper is touching the reset button and then the gameshark screen will appear do the same loading procedure on how up load the game. At the screen where it tells you to open the tray, grap the top of the tape that is on top of the ps2 and grab the flap, which you bent in a half inch so you have a tab, and pull it off and let the tape stick on the bottom, under the open cd, and the tray will pop out and close by itself, and you did it without holding down the button with your finger!
It may sound hard but it is very simple.
:tup:

Do you have a pic, I am a littlr confused.
Peace,
real_iltfg

here's my method
DIRECT BOOT MWA HAHAHA