CDROM-Guide forums

CDROM-Guide forums (http://www.cdrom-guide.com/forums/index.php)
-   DVD (http://www.cdrom-guide.com/forums/forumdisplay.php?f=11)
-   -   Going completely insane... (http://www.cdrom-guide.com/forums/showthread.php?t=275524)

ComaLock Oct 12, 2004 07:45 PM

Going completely insane...
 
Hey guys, Hopefully someone here will be able to solve this irritating problem Im having with my dvd burner, I've completely been unable to burn any dvd's as of just recently, I get the "internal target failure" message when I'm burning in nero., I've tried everything, different media, different firware, cleaned the lens, is there anything else I should b doing? Ive searched hundreds of posts with still no help to me, I would be eternally gratefully for any help or opinions that will solve this f*$cking problem.
Thanks in advance.

Here is my nero log.



Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 5/11/98 8:01:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2/13/04 6:41:26 PM
Nero version: 6.3.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 0 TA 0 - 6.3.0.3
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 0 TA 0 - 6.3.0.3
Adapter driver: <ESDI_506> HA 0
HL-DT-ST DVDRAM GSA-4082B (Target 0, D:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 47185920 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 303MB (310800kB)
Free physical memory: 0MB (32kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.10.2004
UDF/ISO compilation
9:53:32 AM #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

9:53:32 AM #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

9:53:32 AM #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:53:32 AM #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

9:53:33 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

9:53:33 AM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4082B running

9:53:33 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

9:53:33 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

9:53:34 AM #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

9:53:34 AM #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2064015 (458:40.15, 4031MB)

9:53:34 AM #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

9:53:34 AM #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193

9:53:34 AM #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:53:34 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2064016 (2064016) = #2064016/458:40.16
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2064016 blocks [HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

9:53:34 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4227104768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2064016 | lead-out | 1 | 0x00 | 0x41

9:53:34 AM #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

9:53:34 AM #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

9:53:34 AM #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

9:53:34 AM #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 2x (2,760 KB/s)

9:53:34 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:53:34 AM #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 12:50,094 (770094ms) -> OK

9:53:34 AM #22 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

9:53:34 AM #23 Text 0 File Mmc.cpp, Line 19516
Set BUFE: supported -> ON

9:53:34 AM #24 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

9:53:34 AM #25 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:54:02 AM #26 Text 0 File Cdrdrv.cpp, Line 1277
09:54:02.630 - HL-DT-ST DVDRAM GSA-4082B\H0 T0 : Queue again later

10:09:10 AM #27 SCSI -1061 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02290000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 0x00 0x00 0x0D 0x70 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x24 0x04 0x0C 0x44 0x86

10:09:10 AM #28 CDR -1061 File Writer.cpp, Line 301
Internal target failure

10:09:10 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:09:11 AM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:09:11 AM #31 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 880671

10:09:13 AM #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:09:13 AM #33 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:09:13 AM #34 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 2x (2,760 KB/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 2/13/04 6:41:08 PM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 3/2/01 8:55:54 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 5/11/98 8:01:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.1998, size=69454 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.1998, size=18805 bytes, created 5/11/98 8:01:00 PM

Registry Keys:

Insomniac Oct 12, 2004 08:22 PM

This really sounds like a problem with the actual drive or it's quality.

Is it still under warranty?

I would definitely try another one if it is.

ComaLock Oct 12, 2004 09:16 PM

Well, since I removed the cover to clean the lens, it's void of warranty now, but I could care less really, I'm willing to accept the drive is faulty, but seeing as I can still burn cd's, I dont understand the real problem. Its not all bad...I guess. Bloody LG, pieces of **** drives I will never buy another, this is my second LG burner and Ive heard other stories similar to mine with the same drive. Oh well, you live and learn I guess.

Nuttapper Oct 13, 2004 04:30 PM

[b]TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR) [/b]

Inso is correct M8

ComaLock Oct 13, 2004 05:23 PM

****, good spotting both of you.
I'm guessing this is irrepairable?

ComaLock Oct 13, 2004 05:29 PM

What I wanna know is, why am I still able to burn cd's, if there is a hardware error?
Bloody hell...anyone know what could have caused this?
Firmware upgrade?
Although after I did the upgrade everything was sweet, for a few good burns, then it started.


All times are GMT -5. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved