CDROM-Guide forums

CDROM-Guide forums (http://www.cdrom-guide.com/forums/index.php)
-   Windows 2000 (http://www.cdrom-guide.com/forums/forumdisplay.php?f=69)
-   -   Set up new vid. card [; ; win2KPro] (http://www.cdrom-guide.com/forums/showthread.php?t=247226)

lil_b2003 May 29, 2003 09:54 AM

Set up new vid. card [; ; win2KPro]
 
OK, im gonna try to set up a new video card on an e-machine, it has an AMD 2000+ processor 40 gb a pre-installed S3 ProSavage8, and has an available AGP slot, what my main concern is will it fry my motherboard?, i bought it from my friend and hes too stupid to tell me how and wont sell me the manual, and what slot i put it in?

any help is greatly appreciated

lil_b2003 May 29, 2003 09:56 AM

****, the video card is a Radeon 7000 64mddr

nightheart May 29, 2003 10:58 AM

M8 if it's an AGP card, it'll only fit in one slot. It should work w/out a problem, but you might have to disable the onboard graphics, either in the BIOS or in windows device manager.............BTW, I didn't think many emachines had an AGP slot. It'll be the top slot, slightly off center from the rest of them, and a different size/color than the rest of slots.................HTH

Lee2003 May 29, 2003 01:57 PM

The AGP slot is a brown slot slightly smaller then the PCI slots, (white ones) dont worry about putting the card in the wrong slot because it will not fit in any other slot unless you took a hammer to it ;)


All times are GMT -5. The time now is 04:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved