View Single Post
  #440  
Old Oct 13, 2003, 07:39 AM
whiper whiper is offline
Veteran
 
Join Date: Jan 2001
Posts: 576
Default

whats wrong with mine?
invalid block address
could not perform end of disc at once
failed at 1x
firmware .58 datawrite 1x yellow

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 16:13:43
Nero version: 6.0.0.0
Recorder: <PIONEER DVD-RW DVR-105> Version: 0.54 - HA 5 TA 0 - 6.0.0.0
Adapter driver: <> HA 5
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <VOBID InstantDrive CD >Version: 14 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <VOBID> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 YAR4 nvidesm Port 0 ID 0 DMA: ?
DiskPeripheral : Maxtor 6Y120L0 YAR4 nvidesm Port 0 ID 1 DMA: ?
CdRomPeripheral : PIONEER DVD-RW DVR-105 1.33 nvidesm Port 0 ID 1 DMA: ?
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 1 ID 0 DMA: ?
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 0 DMA: ?
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 1 DMA: ?
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvscsi Port 3 ID 0 DMA: ?
CdRomPeripheral : Generic STEALTH DVD st324kj Port 4 ID 0 DMA: ?
CdRomPeripheral : Generic STEALTH DVD st324kj Port 4 ID 2 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 444MB (455020kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.10.2003
ISO compilation
13:04:26 #1 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

13:04:26 #2 Text 0 File Reader.cpp, Line 118
Reader running

13:04:26 #3 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVD-RW DVR-105 running

13:04:26 #4 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

13:04:26 #5 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media

13:04:47 #6 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 1187229 (263:49.54)

13:04:47 #7 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE

13:04:47 #8 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

13:04:47 #9 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1187230 (1187230) = #1187230/263:49.55
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1187230 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

13:04:47 #10 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info

=======================

Burning to PIONEER DVD-RW DVR-105 on a DVD-R media

13:04:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -1863213056

13:04:47 #12 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started

13:04:47 #13 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed

13:04:47 #14 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 1x (1,380 KB/s)

13:04:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

13:04:47 #16 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 29:59,261 (1799261ms) -> OK

13:04:47 #17 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode

13:04:47 #18 Text 0 File Mmc.cpp, Line 18119
Set BUFE: supported -> ON

13:04:47 #19 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes

13:04:47 #20 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:04:50 #21 Text 0 File Writer.cpp, Line 318
13:04:50.265 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 47msec)

13:34:48 #22 Text 0 File WriterStatus.cpp, Line 112
<PIONEER DVD-RW DVR-105 > start writing Lead-Out at LBA 1187230 (121D9Eh), lenght 0 blocks

13:34:48 #23 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

13:34:49 #24 SCSI -1064 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03961000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x12 0x1D 0x90 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

13:34:49 #25 SCSI -1064 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03961000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x12 0x1D 0x90 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

13:34:51 #26 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

13:34:51 #27 CDR -1064 File ThreadedTransferInterface.cpp, Line 1594
Invalid block address

13:34:51 #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1594
Could not perform end of Disc-at-once

13:34:51 #29 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

13:34:51 #30 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

13:34:51 #31 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 1x (1,380 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 04/10/2003 22:23:29 (Prassi/Veritas driver for win 2K)
File 'Drivers\vobid.sys': Ver=1, 1, 0, 20, size=29239 bytes, created 01/08/2003 14:47:24 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Reply With Quote