View Single Post
  #5  
Old Apr 23, 2004, 02:33 PM
dragula96 dragula96 is offline
Member
 
Join Date: Oct 2002
Posts: 70
Default

I just finished working on dvd2one Click! for a cuple of hours and have an early alpha version ready that will work on backing up in "full Disk" mode only .
I added the settings area for configuration and this program should work on any xp/2000 machine, i dont think this will work on 9x or me.

i have tested it on windows xp pro machine. anyone that wants to try it out send me an email so i can send it out for testing make sure you give me some feedback.

here is the official readyme file that will be included with the .exe file.


dvd2one Click!
by dragula96
email: [email]davidmtz2000@yahoo.com[/email]
website: www.dvd2oneclick.batcave.net

please read carefuly since this is a alpha relase settings need to be made exacly as described.

-------------------------------------------
========================================
version: alpha 2
========================================
software needed to run dvd2one click:

- dvd2one 1.40 (full registred version) from www.dvd2one.com
- dvd decrypter 3.2.1.0 (freeware) from www.dvddecrypter.com/
- nero or recordnow (trialware or buy) from www.nero.com or from ???
- ghostmouse 2.0 (freeware) from ***********.snapfiles.com/get/ghostmouse.html or google

hardware needed:
- you must have enuff drive space to rip, and transcode a movie (atleast 13 gigs.)
- YOU MUST HAVE 2 DVD DRIVES!, this is important one to read and one to write in order for
dvd2one Click! to work with one click.


==========================================
SETTING UP DVD2ONE CLICK!
==========================================
GENERAL SETUP
-------------------------------------------
MAKE SURE YOU HAVE A SOURCE FOLDER (where dvddecrypter stores ripped files)
AND A DESTINATION FOLDER (where dvd2one will output the transcoded files)



DVD DECRYPTER
-------------------------------------------
make sure that dvd decrypter is installed in its default directory ("C:\Program Files\DVD Decrypter")
or dvd2one Click! will not work!.

open up dvd decryptor and click on Tools -> Settings.
under the "general" tab under "default Destination" section choose "custom" then choose a folder for files to be ripped to then hit "ok".
remember the folder because you will need to point to it later in dvd2one.

that should be it for dvd decrypter settings for now.

-----------------------------------------------------------------------------
GHOSTMOUSE
-----------------------------------------------------------------------------
install ghost mouse in its default directory C:\GMouse20
be sure to read the ghostmouse readme for finding out how to pause ghostmouse while running if nessessery.
run ghost mouse from your start/programs or whatever.
click on file -> options and check the box labled "close after AutoPlay", then hit "ok" button.

Ok now we need to "teach" ghostmouse to open and run dvd2one and nero.
TIP: when recording with ghostmouse be sure to move your mouse slowly and when clicking on
the program icons alow 5-8 seconds of idle time to allow the programs to load up then
continue to move the mouse and click.

here are the steps:
before anything close any windows or programs everything should be closed exept for ghostmouse.

1. move your dvd2one and nero icons all the way to the right hand cornor of yoru screen.
some where where they wont get in the way later,and do not move them from there ever!

2. (rip a full dvd to your source folder first then..) open ghostmouse and click on record move the mouse over the dvd2one icon and double click it
choose your source folder then choose your destination folder
- choose "DVD-+R(w)" in the combo box
- under copy mode choose "full disk"
- choose your compression ratio then click "Next"
under "select audio.."
- choose the first audio ( note: this audio track will always be selected for futuer dvd rips)
about 98% of the time its the right one.
- click on "start" after that dvd2one starts doing its thing.
- go back to ghostmouse and click on "stop" that should end your recording session.
-click on File -> save and save your recording as "dvd2onefull".
-wait for dvd2one to finish transcodeing, when its done click ok and close it up.

setting up nero
to set up nero start a new recording session with ghostmouse, and follow the same basic
steps to creating a dvd, in other words do what you would do normaly to burn a dvd-movie
while recording it with ghostmouse.
- after you are happy with your ghostmouse recording of nero setup, save it as "nero".

After you have your two recorded ghostmouse files, close ghost mouse.
-----------------------------------------------------------------------------------------
DVD2ONE cLICK!
-----------------------------------------------------------------------------------------
- open up dvd2one Click!
- under the settings area on the first textbox goes the path for the
fulldvd2one.gms file you created with ghostmouse, you can brows by
selecting the button to the right of the txtbox.
- In the second box goes the nero.gms file for nero, so brows to that and select it.
- in the "source dvd rom letter" box input your ******/rw where the movie you are going to rip is.
just the letter.
- and finaly in the "dvd2one destination letter" box choose where dvd2one will put the finished files
for example if you have a secondary drive with the letter d: then just input d
this is important because the way dvd2one Click! checks to see if dvd2one is done is by
comparing the free drive space every 1 minute.

-after everything is configerd you may click on the "close settings" button

-once your movie your dvd reading drive and your blank dvd is in your writer drive,
click "Full Disk" a pop up will appear asking you if your settings are correct,
if they are click yes and dvd2one Click! will start up dvd decrypter.

-after decrypter finishes copying the files to your HD, dvd2one click will minimize itself
for 2 or 3 minutes and ghostmouse should pop up and start dvd2one
-then after dvd2one, dvd2one Click! will minimize itself again and ghostmouse will
open up nero for burrning. and thats it!

================================================== ================================================== ==
OTHER IMPORTANT INFORMATION
================================================== ================================================== ====
dvd2one Click! is designed to work while you are away from your computer and are not downloading anything
to your dvd2one"destination" drive.

if anything get in the way of ghostmouse rutien then it will affect the outcome.
MAKE SURE YOU ARE NOT RUNNING ANY SCREENSAVERS, OR POWERDOWN FEATURES, MAKE SURE
THAT YOU HAVE NO OTHER RUNNING SOFTWARE THAT WILL "POP-UP" AND INTERFEAR WITH GHOSTMOUSE.

this program works best while your visiting your motherinlaw, out buying groceries, sleeping, or picking up your
girlfriend/wife from work. so if you run it then start surfing the net and ghostmouse kicks in it will interupt
the progress and screw your one click backup prossess and you will have to start again.

i think thats it for now, please give me feedback at [email]davidmtz2000@yahoo.com[/email] so i can work on getting a better
version out.

================================================== ====================================
NEXT VERSION
================================================== ==================================
The next version of dvd2one Click!
- will save its settings onto the regestry so their will be no need
to input them everytime it starts up.
- "Movie only" function will work.