View Single Post
Old Aug 17, 2009, 03:49 AM
tvsofa99 tvsofa99 is offline
Join Date: Jul 2009
Posts: 4

[QUOTE=chandler68;1575311]You need to check that the drives if on the same IDE port and data coble are set as Master and Slave.

If both drives are set as Master Or Slave they will conflict with one another.

The drive connected to the LAST plug on the IDE data cable should be set as Master, the drive connected to the middle plug on the data cable should be set as Slave.QUOTE]

i could not agree with you