View Single Post
Old Sep 17, 2003, 09:00 AM
Stusy Stusy is offline
Join Date: May 2000
Location: Bournemouth,Dorset,England
Posts: 2,102

What you do is:-
On the X-box put the two shorts on the main mobo that allow the on board TSOP to be flashed.
Boot a disk that has the relevant command lines and bios on, making sure its on very good media as you don't want read errors whilst flashing the onboard bios.
Cut the D0 wire once its booted then flash.
Then remove the old Xtender chip.

Thats probable a simplified version, but the logic is there
Reply With Quote