View Single Post
  #1  
Old Oct 29, 2003, 06:16 PM
Bossworld Bossworld is offline
Junior Member
 
Join Date: Sep 2002
Location: Uk
Posts: 32
Default Grr first coaster!

Is this due to dodgy media, me or something else?

Ritek Datasafe white tops

Disk had done 100% but the buffer was coming completely down - thought it must have finished.

Then I got an error about: "Could not perform end Disc-at-once"

Here's what it says:

Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
Nero version: 6.0.0.19
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4W060H4 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 91531U3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-RW CDR-7S52 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 0 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
CD-RW CDR-7S52 E: CDRom1
Generic DVD-ROM G: CDRom2
VOBID InstantDrive CD H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 106MB (109204kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2003
UDF/ISO compilation
22:59:25 #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

22:59:26 #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

22:59:26 #3 Text 0 File Isodoc.cpp, Line 5950
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:59:26 #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

22:59:26 #5 Text 0 File Reader.cpp, Line 118
Reader running

22:59:26 #6 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVD-RW DVR-106D running

22:59:26 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

22:59:26 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

22:59:26 #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

22:59:26 #10 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2239007 (497:33.32)

22:59:26 #11 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

22:59:26 #12 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

22:59:26 #13 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:59:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2239008 (2239008) = #2239008/497:33.33
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239008 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

22:59:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4585795584, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2239008 | lead-out | 1 | 0x00 | 0x41

22:59:28 #16 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

22:59:28 #17 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

22:59:28 #18 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 4x (5,520 KB/s)

22:59:28 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:59:28 #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 13:53,268 (833268ms) -> OK

22:59:28 #21 Text 0 File DVDR.cpp, Line 1457
Recording mode: Sequential Recording Mode

22:59:28 #22 Text 0 File Mmc.cpp, Line 19195
Set BUFE: supported -> ON

22:59:28 #23 Text 0 File DVDR.cpp, Line 1572
Start write address at LBA 0
DVD high compatibility mode: Yes

22:59:28 #24 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:59:42 #25 Text 0 File Writer.cpp, Line 318
22:59:42.024 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

23:13:36 #26 Text 0 File WriterStatus.cpp, Line 113
<PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 2239008 (222A20h), lenght 0 blocks

23:13:36 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:13:37 #28 SCSI -1064 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AC1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x22 0x2A 0x10 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

23:13:37 #29 SCSI -1064 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AC1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x22 0x2A 0x10 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

23:13:41 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:13:41 #31 CDR -1064 File ThreadedTransferInterface.cpp, Line 1626
Invalid block address
PIONEER DVD-RW DVR-106D\H1 T0

23:13:41 #32 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1626
Could not perform end of Disc-at-once

23:13:41 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:13:41 #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:13:41 #35 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 13/01/2003 10:19:26
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 00:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)