CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > CD-R & CD-RW
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
  #1  
Old Jul 01, 2007, 06:55 AM
ajay2007 ajay2007 is offline
Newbie
 
Join Date: Jul 2007
Posts: 3
Default CD Writing error....Please help!!

hi, I have a HP dv6365us laptop with a matshita dvd-ram uj-851s and lately when i burn data cds with any software I get immediate crash errors. I have tried nero, windows built in, ONES, power iso, magic iso. it seems to start writing
until about 6-7% then crashes. It writes to DVD ok however. I have tried different brand cdrs with the same problem. Just then I got one cdr to go to 80% then 'invalid block size for command'. The following is a log from nero. I cant find drivers to update. Any advice or suggestions is greatly appreciated. The laptop is 4 weeks old and did burn cds in the early stages.

THNX
AJ



Windows XP 5.2
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0

Recorder: <MATSHITA DVD-RAM UJ-851S>Version: 1.50 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <MATSHITA DVD-RAM UJ-851S >Version: 1.50 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-851S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST9160821AS iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-851S F: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2037MB (2086780kB)
Free physical memory: 1420MB (1454556kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.7.2007
CD-ROM (ISO)
9:29:39 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:29:39 PM #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:29:40 PM #3 Text 0 File Burncd.cpp, Line 3196
MATSHITA DVD-RAM UJ-851S
Buffer underrun protection activated

9:29:40 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

9:29:40 PM #5 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using CD-R/RW media

9:29:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 279767 ( 62:12.17)

9:29:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

9:29:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: MATSHITA DVD-RAM UJ-851S;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

9:29:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:29:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 279768 (279768) = #279768/62:10.18
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE2_2332, 2332, config 0, wanted index0 0 blocks, length 279766 blocks [F: MATSHITA DVD-RAM UJ-851S]
--------------------------------------------------------------

9:29:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: MATSHITA DVD-RAM UJ-851S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE2_2332, 2332/0x00, FilePos 0 349800 652768776, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 279768 | 0 | 0x00
279768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:29:41 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 279768 -> 279766.

9:29:41 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

9:29:41 PM #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

9:29:41 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

9:29:41 PM #16 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

9:29:41 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

9:29:41 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (1,200 KB/s)

9:29:41 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:29:41 PM #20 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON

9:29:41 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

9:29:50 PM #22 SPTI -1040 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 01 DC 00 00 1C 00 00 00
Sense Area: 0xF1 00 03 FF FF FF 6A 0A 00 13 00 00 10
Buffer x09e2c380: Len xff10
0x00 00 08 00 00 00 08 00 FF 7F FF 7F FF 7F FF 7F
0xFF 7F FF 7F FF 7F FF 7F FF 7F FF 7F FF 7F FF 7F
0xFF 7F FF 7F FF 7F FF 7F FF 7F FF 7F FF 7F FF 7F

9:29:50 PM #23 CDR -1040 File Writer.cpp, Line 303
Illegal block size for command
F: MATSHITA DVD-RAM UJ-851S

9:29:51 PM #24 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
F: MATSHITA DVD-RAM UJ-851S

9:29:51 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack

9:29:51 PM #26 Text 0 File MMC.cpp, Line 17131
<MATSHITADVD-RAM UJ-851S > start Close Session

9:29:51 PM #27 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 13 00 00 73 03

9:29:51 PM #28 CDR -1106 File WriterStatus.cpp, Line 245
Power calibration error
F: MATSHITA DVD-RAM UJ-851S

9:29:51 PM #29 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

9:29:51 PM #30 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

9:29:51 PM #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (1,200 KB/s)

9:30:26 PM #32 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:30:27 PM #33 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

9:30:27 PM #34 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
  #2  
Old Jul 01, 2007, 05:40 PM
Insomniac Insomniac is offline
Veteran
 
Join Date: Jul 2000
Location: Sydney, Australia. Where else would you want to live?
Posts: 5,746
Default

You don't need to worry about drivers for CD/DVD drives, nor are they made.

Windows has all the files required.


Anyway, according to the log, it's suffering from the dreaded "Power Calibration Error".

First thing I would try is to disable the built-in Windows burning program.

That uses an Adaptec (Roxio) plug-in, which sometimes causes conflicts with other burning utilities.

Start, Run and type in [b]services.msc[/b]

Scroll down to "IMAPI CD-Burning COM Service", double-click, then stop and disable it, Apply and OK.


If that fails, try the suggestions outlined in the following link,

***********.nero.com/nero6/enu/FAQs_Products_NeroBurningROM_Error-Messages.html#9


I've checked all your other settings, and they are OK. Only thing the log didn't list is how much free space your hard drive has?
  #3  
Old Jul 01, 2007, 05:46 PM
ajay2007 ajay2007 is offline
Newbie
 
Join Date: Jul 2007
Posts: 3
Default

I had already tried disabling services, it did one burn to 80%. I have like a 100G free. Will try the link u have provided tonite. Thnx
  #4  
Old Jul 01, 2007, 06:01 PM
ajay2007 ajay2007 is offline
Newbie
 
Join Date: Jul 2007
Posts: 3
Default

Someone else suggested it could be cheap media. The media is fairly cheap, but work flawlessly on 2 other computers, one desktop and one laptop.
  #5  
Old Jul 02, 2007, 05:27 PM
Insomniac Insomniac is offline
Veteran
 
Join Date: Jul 2000
Location: Sydney, Australia. Where else would you want to live?
Posts: 5,746
Default

Yes, it could very well be the media. The Nero link suggests media as one of the possibilities. (It's also the most common culprit)

Just because the media works in other PC's, is no guarantee it will work in all.

Different drives have different lasers, and some are more picky and sensitive than others.

Media is so cheap these days, I don't know why people use no name or discount brands.

I only use Verbatim, and in all the years, have never had a problem with them.


At least keep a few good quality CD/DVD's on hand for times like this.
  #6  
Old Aug 08, 2007, 05:24 PM
Yasho Yasho is offline
Newbie
 
Join Date: Aug 2007
Posts: 1
Default

Quote:
Originally Posted by ajay2007
hi, I have a HP dv6365us laptop with a matshita dvd-ram uj-851s and lately when i burn data cds with any software I get immediate crash errors. I have tried nero, windows built in, ONES, power iso, magic iso. it seems to start writing
until about 6-7% then crashes. It writes to DVD ok however. I have tried different brand cdrs with the same problem. Just then I got one cdr to go to 80% then 'invalid block size for command'. The following is a log from nero. I cant find drivers to update. Any advice or suggestions is greatly appreciated. The laptop is 4 weeks old and did burn cds in the early stages.
Same Laptop, Same Problem !!!
I also try to find drivers or firmware for MATSHITA DVD-RAM UJ-851S but........ same story......... NOTHING !!! When call in HP they only waste my time and said that this device have waranty 7 days count from day of buying and maybe i'm pushing the DVD door too much and also tell me ......... Give us your telephone number and we call you when find any drivers for MATSHITA DVD-RAM UJ-851S because that device was made april 2007 and for "The ricemen" from Panasonic was too hard to write software for they "Brand New Product"
Please guys, any information must be helpfull !!!
Thanks !!!
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:47 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved