CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Video Game Backup - Xbox > Xbox Modchip Help & Installation
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


Reply
 
Thread Tools Display Modes
  #1  
Old May 23, 2003, 01:28 PM
ShedaoShai ShedaoShai is offline
Member
 
Join Date: May 2001
Posts: 144
Default Matrix install ?'s

sponsored links

 
Just recieved Matrix modchip it didn't come with the spacer or tape that the installation guide says should.

what should i use for the spacer\washer


ok could somebody tell me if i doing this right


i downloaded winLPC
and have 4976.02_Purple_Noani bios file

i put the chip on the programmer put a new 9 volt battery in it then attach it to the lpt1 port and then open winlpc and flash

now i take the xbox apart following the guide

I have a v1.1 xbox so with probably have scrapde D0 pt. and take some solder off right (didn't look all that bad when i took my xbox apart the other day, but it is quite tiny so i don't know if i could get a good connection or not with the pins

After that i have slayer’s installer 2.1 on cd-rw and put it in
(what all does that install?Besides evox)

And I am good to go.
Reply With Quote
  #2  
Old May 23, 2003, 05:16 PM
ShedaoShai ShedaoShai is offline
Member
 
Join Date: May 2001
Posts: 144
Default

Guess i should change this to the Noob experience

ok had trouble getting the programmer to connect to the pc til i relized that the screws were in the way so i took them off and got winlpc to run

took 5 or 6 times before actually programmed without an error

now i need to find a washer will anythat size do or do i need non-metallic one
Reply With Quote
  #3  
Old May 23, 2003, 06:55 PM
ShedaoShai ShedaoShai is offline
Member
 
Join Date: May 2001
Posts: 144
Default

ok washer good got it in but flashing red i have a v 1.1

so it is that or i need to adjust the postion (though the 3 holes look perfect) can the light even flash if the what are they lpc pins have too much solder or are they alright and the D0 pt. needs a little scratching

Last edited by ShedaoShai; May 24, 2003 at 01:33 AM.
Reply With Quote
  #4  
Old May 23, 2003, 06:58 PM
ShedaoShai ShedaoShai is offline
Member
 
Join Date: May 2001
Posts: 144
Default

The 3 holes around the D0 pt. are lined up but all i get is flashing red light when in mode 1 and a solid green light in mode 3 but just says can't play cd screen when i try slayer's

i haven't scraped the D0 point yet



any advice would be appreciated
Please

Last edited by ShedaoShai; May 24, 2003 at 02:28 AM.
Reply With Quote
  #5  
Old May 25, 2003, 02:37 PM
ShedaoShai ShedaoShai is offline
Member
 
Join Date: May 2001
Posts: 144
Default

still nothing i thought there was a thing on xbox scene on scratching the D0 point

some kind on ceramic pencil or something
Reply With Quote
  #6  
Old May 26, 2003, 05:12 PM
ShedaoShai ShedaoShai is offline
Member
 
Join Date: May 2001
Posts: 144
Default got it

scrapping the point worked

not that anybody cares
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ruined Matrix bios flash, which bios to install? Stevensly Video Game Backup - Xbox 3 Jun 01, 2003 05:00 PM
About to install the Matrix gottajiboo Video Game Backup - Xbox 3 May 30, 2003 02:59 PM
Need Help With Matrix Install!! fastZ8 Video Game Backup - Xbox 7 Nov 01, 2002 06:06 AM
Matrix Install Jaymus Xbox Modchip Help & Installation 2 Oct 31, 2002 05:34 PM
Matrix install horror story... brandonbooth Xbox Modchip Help & Installation 9 Oct 29, 2002 06:04 PM


All times are GMT -5. The time now is 05:26 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 1996-2009 CDROM-Guide.com. All rights reserved