CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > DVD > DVD/CD Media Discussion
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


Reply
 
Thread Tools Display Modes
  #1  
Old Oct 01, 2004, 02:38 AM
bluenautica bluenautica is offline
Member
 
Join Date: Jan 2001
Location: astoria, ny, us
Posts: 51
Default Burners not working?

sponsored links

 
i have been trying to burn for a really long time now.. and i have not been able to burn a thing.. either dvd or cd.. i have used every type of software imaginable.. and all of them give me the same result.. it burns for a couple of minutes.. then the buffer goes down to zero and it stops and gives me an error.. if this sounds familiar to anybody.. please let me know what it is.. oh.. and this happens with both of my cd writers.. i have a LG cdrw and a NU dvdr.. both were working fine and now they both dont work.. i tried uninstalling them and reinstalling but that failed.. ill try anything right about now.. i have windows xp, 1g ram, 80 gig hd with 12 gig free and 2.2gig processor.. i shouldnt be having problems..
Reply With Quote
  #2  
Old Oct 01, 2004, 03:34 AM
bluenautica bluenautica is offline
Member
 
Join Date: Jan 2001
Location: astoria, ny, us
Posts: 51
Default

just lost my fourth dvd... here is the log


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.2
Recorder: <NU DVDRW DDW-081> Version: BX03 - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <NU DVDRW DDW-081 >Version: BX03 - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : NU DVDRW DDW-081 atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
NU DVDRW DDW-081 E: CDRom0
Generic DVD-ROM F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 536MB (549796kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.10.2004
Burn DVD Image
3:24:39 AM #1 Text 0 File Reader.cpp, Line 118
Reader running

3:24:39 AM #2 Text 0 File Writer.cpp, Line 124
Writer NU DVDRW DDW-081 running

3:24:39 AM #3 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

3:24:39 AM #4 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286002 (508:00.02, 4464MB)

3:24:39 AM #5 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

3:24:39 AM #6 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: NU DVDRW DDW-081, Media type: DVD+R

3:24:39 AM #7 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:24:39 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286003 (2286003) = #2286003/508:0.3
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286003 blocks [NU DVDRW DDW-081 ]
--------------------------------------------------------------

3:24:39 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [NU DVDRW DDW-081 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681734144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286003 | lead-out | 1 | 0x00 | 0x41

3:24:39 AM #10 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

3:24:39 AM #11 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

3:24:39 AM #12 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

3:24:39 AM #13 Phase 28 File dlgbrnst.cpp, Line 1800
Speed measurement started

3:24:39 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:27:34 AM #15 Text 0 File WriterStatus.cpp, Line 115
<NU DVDRW DDW-081 > start writing Lead-Out at LBA 2286003 (22E1B3h), lenght 0 blocks

3:27:34 AM #16 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:27:34 AM #17 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

3:27:34 AM #18 Phase 29 File dlgbrnst.cpp, Line 1751
Speed measurement completed: 19.2x (26,564 KB/s)

3:27:34 AM #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 8x (11,040 KB/s)

3:27:34 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:27:34 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03025000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

3:27:34 AM #22 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 7:11,313 (431313ms) -> OK

3:27:34 AM #23 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes

3:30:25 AM #24 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03420000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0x23 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

3:30:25 AM #25 CDR -1135 File Writer.cpp, Line 301
Write error

3:30:25 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:30:25 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

3:30:27 AM #28 Phase 127 File dlgbrnst.cpp, Line 1800
Generating DVD high compatibility borders

3:30:58 AM #29 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

3:30:58 AM #30 Phase 129 File dlgbrnst.cpp, Line 1800
Generating DVD borders completed successfully

3:30:58 AM #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

3:30:58 AM #32 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 8x (11,040 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.0.162 , size=24576 bytes, created 1/27/2004 5:32:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 9/3/2002 12:27:33 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
16x dvd burners comming this month nednedned DVD 2 Jun 19, 2004 11:35 AM
Having problems getting Segagen working? bast525 Dreamcast 3 Feb 26, 2004 10:50 PM
software options for running 2 dvd burners on the fly on 1 pc rabby2 DVD 6 Jan 12, 2004 03:53 AM
Burning with multiple burners danman CD-R & CD-RW 3 Nov 03, 2002 03:58 PM
WTD: an actual working Goldeneye n64 rom for Xbox.. snakes2solid Video Game Backup - Xbox 4 Aug 30, 2002 01:22 PM


All times are GMT -5. The time now is 12:21 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved