CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Video Game Backup - PS2 > PS2 Modchip Help & Installation
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


Reply
 
Thread Tools Display Modes
  #1  
Old Jan 31, 2005, 08:47 PM
chay03 chay03 is offline
Newbie
 
Join Date: Jan 2005
Posts: 1
Default Contollers Not working

sponsored links

 
I just installed the Magic V chip into my PS2 version 7. My controllers aren't working. The ribbon cable is plugged in. The funning thing is, the ****og sticks will toggle the cursor to left or right, and the ****og button is lit. The directional buttons and keypad aren't working.

Any ideas for help,

thanks in advance for any helpful posts.
Reply With Quote
  #2  
Old Feb 01, 2005, 05:31 PM
ghost2_fitter ghost2_fitter is offline
Senior Member
 
Join Date: Jan 2005
Location: Midlands U.K
Posts: 302
Default

If you disconnected the ribbon cable when fitting the chip go through the whole process of taking the case apart and and recheck that the cable is in properly, it doesn't have to be much out to cause problems. whilst you've got the console open, and making certain that you've done it safely, run up the console before you put it back together to check the controller, if it's still not working dissconnect the chip and check if it works without it.
If it does,and you're in the U.K let me know and I can sort you out a ripper2 gold for next to nothing, though i'd be surprised if it was the chip. Also you don't solder anywhere near anything that would cause this. Again if you're in the U.K and need a new port and ribbon let me know and I'll sort you out.
I hope that's of some help, even if not the definative answer you were looking for



[email]ghost2_fitter@hotmail.co.uk[/email]
for all your premod needs
Ebay I.D Ghost2_fitter

Last edited by ghost2_fitter; Feb 01, 2005 at 05:33 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
cd rom isn't working... brigi CD-R & CD-RW 2 Jan 18, 2005 02:09 PM
Having problems getting Segagen working? bast525 Dreamcast 3 Feb 26, 2004 09:50 PM
monitor not working vangl76 Open to All Computer Related Topics 5 Sep 26, 2003 02:18 PM
New Spongebob PS2 original CD Not Working! mg6134 Video Game Backup - PS2 1 Feb 11, 2003 01:36 PM
Modems Stopped Working playboyuk Open to All Computer Related Topics 1 Sep 26, 2002 12:20 AM


All times are GMT -5. The time now is 11:26 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved