CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Video Game Backup - Xbox
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
  #1  
Old Mar 02, 2003, 04:39 PM
iceberg_is_on_fire iceberg_is_on_fire is offline
Senior Member
 
Join Date: Sep 2001
Posts: 419
Default I can't even setup the network, please help

sponsored links

 
Ok, I bought an RJ45 cable from Best Buy the other day and last night I got around to trying to network my PC to my Xbox. I connect the cable to both. I run network setup, but I really don't know what I'm doing. Do I have to get log off of the internet to properly network this. I've looked at the various guides on here but I'm still lost. I go into network connections and scan for hardware changes in hopes that it will acknowledge the cable, to no avail however. Can somebody lead me down the right path please?
  #2  
Old Mar 02, 2003, 05:28 PM
steve54 steve54 is offline
Veteran
 
Join Date: Aug 2002
Posts: 551
Default

you need some ftp software like flashxp to network your xbox and pc.look in the xbox,how to section.
  #3  
Old Mar 02, 2003, 05:44 PM
iceberg_is_on_fire iceberg_is_on_fire is offline
Senior Member
 
Join Date: Sep 2001
Posts: 419
Default

I have had FlasxFXP for quite some time
  #4  
Old Mar 02, 2003, 06:17 PM
iceberg_is_on_fire iceberg_is_on_fire is offline
Senior Member
 
Join Date: Sep 2001
Posts: 419
Default

I have done something that says I have a network bridge, am I on the right track?
  #5  
Old Mar 02, 2003, 11:38 PM
Slomar Slomar is offline
Senior Member
 
Join Date: Oct 2002
Location: Philadelphia, PA
Posts: 420
Default

Sounds like you're on track... keep in mind that when you use fxp you will have to input the ip address of you xbox as well as your user name and password. The evox default is xbox xbox. If you are using a guide, where exactly are you getting stuck? What errors are happening?
  #6  
Old Mar 03, 2003, 05:19 AM
PUNKASS76 PUNKASS76 is offline
Member
 
Join Date: Aug 2002
Posts: 189
Default

Simple Guide: Connecting XBOX to PC
Written by unr3al

Ive noticed that their is no real simple guide on connecting the xbox to your pc although their are guides on other sites they dont make it clear or simple enough for those that just want to do games and put games on the HD so here is a dead simple working guide for everyone,


Im assuming that you own an xbox that is capable of playing backups and has evolution x installed.


Right first off you need to go get yourself a network card any will do, you can get them for 2 at computer fairs or pc world has them in for 10.

Then you need to get a CROSSOVER CABLE, i use a belkin one its yellow 2 metres long and its only 7 at pc world.

Then install the network card in your pc.


Now here is the bit that most people seem to have questions about.
Go into evox (if you are running it from your xbox HD or a cd) and go to settings, then move down to Use Static IP and make sure it says YES, then go to IP, and make it 192.168.0.2, then go to Default Gateway and make it 192.168.0.1, then save and exit.

Now go to your PC go to control panel then network connections, now double click on netwok connection now in the box that has appeared highlight the TCP/IP bit and click properties, it says "OBTAIN AN IP ADDRESS AUTOMATICALLY" and "USE THE FOLLOWING IP ADDRESS" tick "USE THE FOLOWING IP ADDRESS" then in the box that says IP address type in 192.168.0.1 then go the SUBNETMASK box and make sure it says 255.255.255.0, then click OK.

Now you have got your pc and you xbox ready to go ALMOST, what you need now is a program called FLASHFXP you can get it in a free 30 day trial format which you will find if you search for it in GOOGLE, then once you have FLASHFXP install it on your PC.

Now take the CROSSOVER CABLE you bought and plug one end into your xbox,s ethernet port on the back, then plug the other into your network card, now start your pc up (if you have any firewalls or anything like that turn them off completely) now switch your xbox on (no disc in the xbox) you will now have a connection between your PC and your XBOX.

Now open up FLASHFXP go over to the little orange lightening symbol and click it then click on QUICK CONNECT now you get a box, in the SERVER OR URL box type in 192.168.0.2 then in the USER NAME box type xbox, then in the PASSWORD box type xbox, now make sure the box that says PORT has got 21 in it, then click on CONNECT you will then see a bunch of folders apear in the right hand side window and in the bottom right hand side window it will tell you the connection info now you are inside your xbox YAY.

This is the simplest way to do this if you are just looking to edit menus or copy games stuff like that.

DEAD SIMPLE.


Hope this helps.


I understand that someone will say "but if they have evox on their HD they have already connected to their xbox" NO alot of people buy it all ready done and anyway if you are running it from a cd you can still use my guide


unr3al.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't setup ZoneAlarm with my Network!! [; ; winXP] kev269 Windows XP 4 Dec 22, 2003 11:02 AM
Network setup help needed... ellal Open to All Computer Related Topics 2 Mar 31, 2003 01:21 AM
3 way network setup rdavidgoodwin Computer Networking & Security 2 Mar 12, 2003 11:23 AM
Network setup wantapieceofme Computer Networking & Security 3 Dec 24, 2002 10:57 AM
network setup connections ask to enable firewall during setup??? fackyah Computer Networking & Security 0 Oct 23, 2002 09:28 PM


All times are GMT -5. The time now is 11:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved