CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Device Driver Questions
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  

Thread Tools Display Modes
Old Jun 30, 2003, 04:27 PM
testicus testicus is offline
Senior Member
Join Date: Oct 2000
Posts: 267

sponsored links
Thank you very much!
I did search for about an hour and a half but not in the right spot I guess
I just gave up on 2.0, figuring I'd have to live with 1.0
Thanks again!!
Old Jul 02, 2003, 02:06 PM
Van Nugent Van Nugent is offline
Join Date: Sep 2000
Location: U.S.A.
Posts: 6,779

Stuck by Van for folks that need the driver.
Old Aug 24, 2003, 08:37 AM
ilway ilway is offline
Join Date: Aug 2003
Posts: 1

If it was really needed %)
ver 5.1.2600.1243
Old Aug 24, 2003, 12:43 PM
public-enemyukl public-enemyukl is offline
Senior Member
Join Date: Nov 2002
Location: london
Posts: 227

i'm installing a sp1 update for my laptop which running on xp 2002 home edition ...

will this then let my laptop reconize the belkin 2.0 usb notebook card ...

or could it be my pcmcia card slots are dead ... my laptop is working fine accept it dopnt reconise any thing on the pcmcia card slots .. not even a beep ... was told i need a universal usb 2.0 driver

please help been at it for hours now .. #

Old Sep 30, 2003, 01:02 AM
Van Nugent Van Nugent is offline
Join Date: Sep 2000
Location: U.S.A.
Posts: 6,779

If your PCMCIA slots are working properly, updating to SP1 level will allow the system to recognize the USB 2.0 cards. Sorry for the late reply. You should have posted your own thread or people will not read it as they only check this one when they need the driver. I've not checked this thread for quite a while either.

Also, folks, the Compaq driver that ilway posted above is intended to fix some problems with some Compaq models. You can download this [url=]Text File[/url] that explains what the driver does before applying it to your XP system. Drivers provided by 3rd party vendors will only work best on the models that they are written for and may cause incompatibility problems to other models. Best thing is to apply XP SP1 or stick with MS drivers unless you're sure that the drivers are for your model.
Old Nov 02, 2003, 02:35 PM
crash-cyberdrive crash-cyberdrive is offline
Join Date: Nov 2001
Location: US
Posts: 129
Default USB 2.0

The content incorporate USB 2.0 32-bit support for EHCI Host Controllers on the Microsoft(r) Windows(r) XP operating system (build 2600). Please note that Windows .NET Server and Windows XP SP1a will NOT need this package, because they already contain software support for USB 2.0.

USB 2.0 EHCI Host Controllers Supported

The drivers provided have been tested with the NEC USB 2.0 host controller and the Intel EHCI Host Controller. The hardware IDs of the USB 2.0 host controllers supported by the provided solution are as follows:


The driver will not install on any other EHCI controllers with hardware IDs different from the ones stated above. Microsoft’s plans regarding support of additional EHCI controllers can be found on [url]***********[/url]

USB 2.0 Hub support

USB 2.0 hubs are supported natively by Windows XP. All hubs that report correct hub class code in their device descriptor will be compatible with the existing USBHUB.SYS driver in Windows XP.

Both packages below need to be installed to support USB 2.0 on windows XP.

USB 2.0 EHCI package
QFE fix for existing USB driver stack on Windows XP

The USB 2.0 EHCI package consists of the following files:


[URL=********]USB 2.0 EHCI Download[/URL]

The USB EHCI package contains the Enhanced Host Controller mini-port driver. The INF file is responsible for loading the USBEHCI.SYS host controller miniport on a Windows XP system, and the host controller coinstaller (HCCOIN.DLL) is responsible for synchronizing communication between the Enhanced Host Controller and the companion host controllers.

QFE fix for existing USB driver stack on Windows XP

The QFE package is responsible for updating USBPORT.SYS and USBHUB.SYS on Windows XP. Localized versions of this package only differ in terms of the QFE installation user interface (UI), displayed during package installation. Since this package replaces USBPORT.SYS and USBHUB.SYS with updated versions, a reboot is essential.

Installation Directions

Please follow these directions for a smooth installation of the USB 2.0 package.

Both the USB EHCI package and the QFE (described in section 2) must be installed.
Always install the QFE package first. This will prompt for a reboot. Before you reboot, please ensure that you have installed the EHCI Package also. Install the USB 2.0 EHCI package using Plug and Play INF driver installation procedures.
Reboot your machine.

[URL=********]QFE Download[/URL]

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ebay pop ups!!! ERP Open to All Computer Related Topics 12 Mar 11, 2010 05:06 PM
USB 2.0 on PCI vs PCMCIA Ronaldsoft Open to All Computer Related Topics 3 May 09, 2003 08:58 AM
TDK USB 2.0 Drive, problems burning? lhaney CD-R & CD-RW 8 Aug 21, 2002 06:24 PM
USB 2.0 PCMCIA Card, Problems with install lhaney Open to All Computer Related Topics 0 Aug 13, 2002 04:18 AM
is this cable for usb 2.0 ONLY sllewtb Open to All Computer Related Topics 1 Jun 16, 2002 10:12 AM

All times are GMT -5. The time now is 11:37 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1996-2009 All rights reserved