CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > CD-R & CD-RW
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
  #1  
Old Apr 11, 2008, 03:55 PM
namehere namehere is offline
Newbie
 
Join Date: Apr 2008
Location: in baja sur right now
Posts: 3
Default optorite cw4002 issues

sponsored links

 
hello folks. hope i am posting this in the correct forum. a friend of mine is having issues with a 2nd hand computer he bought. i took a look at it to try to determine why he couldn't burn cds. at first, the cd drive did not even recognize discs. i uninstalled/reinstalled the drivers and this corrected that problem. with nero express, attempting to burn mp3 or data disks, it would reach the point of 100% complete, then fail with a 'could not perform fixation error'. i did run the nero speed/burn tests with nothing indicating a problem with the drive nor the blank sony media. i am hoping one of you guys more intimate with the ins/outs of reading error logs could point me in the right direction. as my friend does not have any funds to purchase a new drive, i am hoping to help him out by fixing what he already has. by the way, i tried updating the firmware to 120e, but the system doesnt accept it. thanks in advance for your time! here is an excerpt from the log file:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 20/01/2005 12:00:00
ahead WinASPI: File 'C:\Archivos de programa\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <OPTORITE CD-RW CW4002> Version: 100E - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GDR8160B>Version: 0012 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : OPTORITE CD-RW CW4002 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GDR8160B atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
OPTORITE CD-RW CW4002 D: CDRom0
COMPAQ DVD-ROM GDR8160B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392624kB)
Free physical memory: 73MB (74904kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.4.2008
CD-ROM (ISO)
18:39:45 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:39:45 #2 Text 0 File Burncd.cpp, Line 3008
OPTORITE CD-RW CW4002
ExacLink activated

18:39:45 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory

18:39:45 #4 Text 0 File Reader.cpp, Line 124
Reader running

18:39:45 #5 Text 0 File Writer.cpp, Line 113
Writer D: OPTORITE CD-RW CW4002 running

18:39:45 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

18:39:47 #7 Text 0 File Burncd.cpp, Line 3302
Turn on Track-At-Once, using CD-R/RW media

18:39:47 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 221830 ( 49:19.55)

18:39:47 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

18:39:47 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: OPTORITE CD-RW CW4002;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 20, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:39:47 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:39:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 221831 (221831) = #221831/49:17.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 221829 blocks [D: OPTORITE CD-RW CW4002]
--------------------------------------------------------------

18:39:47 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: OPTORITE CD-RW CW4002] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 454617088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
221831 | lead-out | 1 | 0x41 | 0x00

18:39:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 221831 -> 221829.

18:39:48 #15 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:39:48 #16 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

18:39:48 #17 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

18:39:48 #18 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

18:39:48 #19 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 32x (4.800 KB/s)

18:39:48 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:39:48 #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: ExacLink -> ON

18:42:13 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:42:16 #23 Text 0 File MMC.cpp, Line 16379
<OPTORITECD-RW CW4002 > start Close Session

18:46:37 #24 SPTI -1033 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
Buffer x03975200: Len x20

18:46:37 #25 CDR -1033 File ThreadedTransferInterface.cpp, Line 1308
Drive not ready
D: OPTORITE CD-RW CW4002

18:46:37 #26 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation

18:46:37 #27 Text 0 File MMC.cpp, Line 16379
<OPTORITECD-RW CW4002 > start Close Session

18:46:37 #28 SPTI -1023 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C

18:46:37 #29 CDR -1023 File ThreadedTransferInterface.cpp, Line 1308
Command sequence error
D: OPTORITE CD-RW CW4002

18:46:37 #30 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation

18:46:38 #31 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 32x (4.800 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  #2  
Old Apr 11, 2008, 04:44 PM
chandler68 chandler68 is offline
Veteran
 
Join Date: Dec 2000
Location: england
Posts: 977
Default

Multisession : TRUE turn it off, it means its not finalising disk.

Also try other media disks.

colin.
  #3  
Old Apr 11, 2008, 05:00 PM
namehere namehere is offline
Newbie
 
Join Date: Apr 2008
Location: in baja sur right now
Posts: 3
Default

thanks colin for the quick reply. i did 4 test burns, one of which was with multi session off. it did not work either. when nero states burning, the drive indicator blinks red. after it is complete(though with failure), i check the disk and it is blank. i will try other media; any recommendations as to the brand that seems to work best? here is an excerpt for burn done with muti-session off:


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 20/01/2005 12:00:00
ahead WinASPI: File 'C:\Archivos de programa\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <OPTORITE CD-RW CW4002> Version: 100E - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GDR8160B>Version: 0012 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : OPTORITE CD-RW CW4002 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GDR8160B atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
OPTORITE CD-RW CW4002 D: CDRom3
COMPAQ DVD-ROM GDR8160B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392624kB)
Free physical memory: 70MB (71776kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.4.2008
CD-ROM (MP3)
15:28:33 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:28:33 #2 Text 0 File Burncd.cpp, Line 3008
OPTORITE CD-RW CW4002
ExacLink activated

15:28:33 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory

15:28:33 #4 Text 0 File Reader.cpp, Line 124
Reader running

15:28:33 #5 Text 0 File Writer.cpp, Line 113
Writer D: OPTORITE CD-RW CW4002 running

15:28:33 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

15:28:34 #7 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\ALEGRES DE LA SIERRA\09.-esta vez sin mentiras alegres de la sierra.mp3

15:28:34 #8 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\08.-laberinto_-_04_-_herido_de_muerte(2)272.mp3

15:28:34 #9 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\10.-lamento de amor(2).mp3

15:28:34 #10 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\11.-quisiera ser una lagrima(2).mp3

15:28:34 #11 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\12.-original banda del sol - un loco enamorado (www leemusica ya st).mp3

15:28:34 #12 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\13.-los rieleros de el norte - tengo rencor por ti(2).mp3

15:28:34 #13 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\edith_marquez_-_memorias_del_corazon_-_03_-_si_no_te_hubieras_ido.mp3

15:28:34 #14 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\02.-C�mplice.mp3

15:28:34 #15 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\04.-banda peque�os musical - nuevo amor441.mp3

15:28:34 #16 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\05.-banda el limon - y que quede claro.mp3

15:28:34 #17 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\06.-.-mentiras no.mp3

15:28:34 #18 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\07.-sergio vega - 04 te presento a mi amante(2).mp3

15:28:34 #19 Text 0 File Burncd.cpp, Line 3302
Turn on Track-At-Once, using CD-R/RW media

15:29:15 #20 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 131613 ( 29:16.63)

15:29:15 #21 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

15:29:15 #22 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: OPTORITE CD-RW CW4002;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 20, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

15:29:15 #23 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

15:29:15 #24 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 131614 (131614) = #131614/29:14.64
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 131612 blocks [D: OPTORITE CD-RW CW4002]
--------------------------------------------------------------

15:29:16 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: OPTORITE CD-RW CW4002] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 269852672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
131614 | lead-out | 1 | 0x41 | 0x00

15:29:16 #26 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 131614 -> 131612.

15:29:16 #27 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

15:29:16 #28 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

15:29:16 #29 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

15:29:16 #30 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

15:29:41 #31 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 32x (4.800 KB/s)

15:29:41 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:29:42 #33 Text 0 File MMC.cpp, Line 21611
Set BUFE: ExacLink -> ON

15:30:42 #34 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\ALEGRES DE LA SIERRA\09.-esta vez sin mentiras alegres de la sierra.mp3

15:30:44 #35 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\08.-laberinto_-_04_-_herido_de_muerte(2)272.mp3

15:30:46 #36 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\10.-lamento de amor(2).mp3

15:30:47 #37 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\11.-quisiera ser una lagrima(2).mp3

15:30:48 #38 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\12.-original banda del sol - un loco enamorado (www leemusica ya st).mp3

15:30:49 #39 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\13.-los rieleros de el norte - tengo rencor por ti(2).mp3

15:30:52 #40 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\edith_marquez_-_memorias_del_corazon_-_03_-_si_no_te_hubieras_ido.mp3

15:30:53 #41 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\02.-C�mplice.mp3

15:30:54 #42 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\04.-banda peque�os musical - nuevo amor441.mp3

15:30:57 #43 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\05.-banda el limon - y que quede claro.mp3

15:30:59 #44 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\06.-.-mentiras no.mp3

15:31:00 #45 WINPFILE 3 File winpfile.cpp, Line 272
El sistema no puede hallar la ruta especificada.

C:\Documents and Settings\Administrador\Mis documentos\01.-Rancho grande volumen 480\07.-sergio vega - 04 te presento a mi amante(2).mp3

15:31:18 #46 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:31:21 #47 Text 0 File MMC.cpp, Line 16379
<OPTORITECD-RW CW4002 > start Close Session

15:35:43 #48 SPTI -1033 File SCSIPassThrough.cpp, Line 323
D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
Buffer x0397a800: Len x20

15:35:43 #49 CDR -1033 File ThreadedTransferInterface.cpp, Line 1308
Drive not ready
D: OPTORITE CD-RW CW4002

15:35:43 #50 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation

15:35:43 #51 Text 0 File MMC.cpp, Line 16379
<OPTORITECD-RW CW4002 > start Close Session

15:35:43 #52 SPTI -1023 File SCSIPassThrough.cpp, Line 323
D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C

15:35:43 #53 CDR -1023 File ThreadedTransferInterface.cpp, Line 1308
Command sequence error
D: OPTORITE CD-RW CW4002

15:35:43 #54 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation

15:35:43 #55 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 32x (4.800 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  #4  
Old Apr 11, 2008, 11:47 PM
chandler68 chandler68 is offline
Veteran
 
Join Date: Dec 2000
Location: england
Posts: 977
Default

Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

Looks like it cant recognise the disk.

First i would get the drive tested in another computer to see if it works there OK or not.

colin.
  #5  
Old Apr 13, 2008, 03:12 PM
namehere namehere is offline
Newbie
 
Join Date: Apr 2008
Location: in baja sur right now
Posts: 3
Default

thanks. i'll see if he knows someone with a computer i can try this out on. i suspect the problem lies in the drive, not the software or the settings. i have tried 2 other media types with different settings with no success.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:47 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved