CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Video Game Backup - PS2 > PS2 Modchip Help & Installation
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old Sep 26, 2007, 06:51 PM
Sam0r Sam0r is offline
Join Date: Sep 2007
Posts: 1
Default PS2 V7/8 and Duo 3 Ultra problem

Last night I finished installing a Duo 3 Ultra into my V7/8 PS2, first time booting a backup and it worked perfectly.

But, the problem arises when I reset the console. If I reset the console, the chip seems to deactivate, and won't boot backups anymore unless I switch it off at the back for about 5 minutes, then it'll work again.

Tonight I decided to take it apart and make sure everything was soldered correctly. Oops.. I'd soldered the RST (I'm assumng that means Reset?) to the wrong point. So, I soldered it to the correct point (Next to the brown IC type component) and powered it up.

Perfect, worked first time. Then I reset it, and it worked again, then again. But after the third time, it stops working! I have to switch it off at the back again for 5 minutes for it to work again.

I'm very very sure its not a bad connection as I've checked, double checked, triple checked, and (whatever comes after triple) checked the connections.

Anyone? This is the third forum I've asked for help on!

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 1996-2009 All rights reserved