CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > DVD
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old Oct 29, 2003, 05:16 PM
Bossworld Bossworld is offline
Junior Member
 
Join Date: Sep 2002
Location: Uk
Posts: 32
Default Grr first coaster!

Is this due to dodgy media, me or something else?

Ritek Datasafe white tops

Disk had done 100% but the buffer was coming completely down - thought it must have finished.

Then I got an error about: "Could not perform end Disc-at-once"

Here's what it says:

Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 15:25:04
Nero version: 6.0.0.19
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4W060H4 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 91531U3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-RW CDR-7S52 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 0 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
CD-RW CDR-7S52 E: CDRom1
Generic DVD-ROM G: CDRom2
VOBID InstantDrive CD H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 106MB (109204kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2003
UDF/ISO compilation
22:59:25 #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

22:59:26 #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

22:59:26 #3 Text 0 File Isodoc.cpp, Line 5950
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:59:26 #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

22:59:26 #5 Text 0 File Reader.cpp, Line 118
Reader running

22:59:26 #6 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVD-RW DVR-106D running

22:59:26 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

22:59:26 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

22:59:26 #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

22:59:26 #10 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2239007 (497:33.32)

22:59:26 #11 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

22:59:26 #12 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

22:59:26 #13 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:59:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2239008 (2239008) = #2239008/497:33.33
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239008 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

22:59:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4585795584, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2239008 | lead-out | 1 | 0x00 | 0x41

22:59:28 #16 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

22:59:28 #17 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

22:59:28 #18 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 4x (5,520 KB/s)

22:59:28 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:59:28 #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 13:53,268 (833268ms) -> OK

22:59:28 #21 Text 0 File DVDR.cpp, Line 1457
Recording mode: Sequential Recording Mode

22:59:28 #22 Text 0 File Mmc.cpp, Line 19195
Set BUFE: supported -> ON

22:59:28 #23 Text 0 File DVDR.cpp, Line 1572
Start write address at LBA 0
DVD high compatibility mode: Yes

22:59:28 #24 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:59:42 #25 Text 0 File Writer.cpp, Line 318
22:59:42.024 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

23:13:36 #26 Text 0 File WriterStatus.cpp, Line 113
<PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 2239008 (222A20h), lenght 0 blocks

23:13:36 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:13:37 #28 SCSI -1064 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AC1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x22 0x2A 0x10 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

23:13:37 #29 SCSI -1064 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AC1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x22 0x2A 0x10 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

23:13:41 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:13:41 #31 CDR -1064 File ThreadedTransferInterface.cpp, Line 1626
Invalid block address
PIONEER DVD-RW DVR-106D\H1 T0

23:13:41 #32 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1626
Could not perform end of Disc-at-once

23:13:41 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:13:41 #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

23:13:41 #35 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 13/01/2003 10:19:26
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 00:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Great Space Coaster!!!!! superchicken78 Video Game Backup - Xbox 4 Dec 19, 2003 05:42 AM
my first coaster :( scoob Video Game Backup - PS2 17 Sep 14, 2003 03:32 PM
I'm going to Start a Coaster Business... [LG; ; win98SE] ng2003uk CD-R & CD-RW 5 Jun 28, 2003 11:18 AM
burning withe cdrwin gives me a coaster( game soul reaver legacy kain) Lee2929 Dreamcast 0 Jul 09, 2002 12:55 PM
roller coaster tycoon Sparx Legacy Game Backup 1 Feb 11, 2002 07:25 AM


All times are GMT -5. The time now is 06:09 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved