CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > CD-R & CD-RW
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
  #1  
Old Jan 29, 2002, 10:27 AM
satrincha satrincha is offline
Newbie
 
Join Date: Jan 2002
Posts: 1
Unhappy Big Problem with my Plextwriter 8/20 since 1 week [Plextor; PX-R820T; win98SE]

sponsored links

 
I cant write any CD since 1 week. before, I couldnot write DivX on a CD-R (700), ..... but i could write ISO files, Audio CD and compil of any files !
but since One week, I can't write nothing !
I have tested it whith Easy 5, néro (5 versions), DiscJuggler ........ all this programm crash .......

This is néro message :

[B]Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22:22:00
Nero Version: 5.5.5.1
Recorder: <PLEXTOR CD-R PX-R820T> Version: 1.07 - HA 1 TA 0 - 5.5.5.1
Adapter driver: <symc8xx> HA 1
Drive buffer : 4096kB
CD-ROM: <PLEXTOR CD-R PX-R820T>Version: 1.07 - HA 1 TA 0 - 5.5.5.1
Adapter driver: <symc8xx> HA 1
PLEXTOR CD-R PX-R820T (Target 0, H : Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
PLEXTOR CD-ROM PX-40TS (Target 3, I : Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 65MB (67092kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
7.1.2002

15:15:05 #1 Text 0 File Reader.cpp, Line 117
Reader running

15:15:05 #2 Text 0 File Writer.cpp, Line 122
Writer CD-R PX-R820T running

15:15:05 #3 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

15:15:05 #4 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 354428 (354428) = #354428/78:45.53
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

15:15:08 #5 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: PLEXTOR CD-R PX-R820T;
CDR code: 00 97 26 24; OSJ entry from: SKC Co., Ltd.
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1A 18 (LI 97:26.24), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

15:15:10 #6 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-R PX-R820T for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 726175744

15:15:10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

15:15:10 #8 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 354428 (354428) = #354428/78:45.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 354426 blocks [CD-R PX-R820T ]
--------------------------------------------------------------

15:15:10 #9 Phase 24 File dlgbrnst.cpp, Line 1426
Caching of files started

15:15:12 #10 Phase 25 File dlgbrnst.cpp, Line 1426
Caching of files completed

15:15:12 #11 Phase 36 File dlgbrnst.cpp, Line 1426
Burn process started at 4x (600 KB/s)

15:15:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

15:35:11 #13 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

15:35:16 #14 SCSI -1046 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x09
CDB Data: 0x5B 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x09

15:35:16 #15 mmc -1046 File ThreadedTransferInterface.cpp, Line 959
This is not a CD-Recordable

15:35:16 #16 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 959
Could not perform Fixation

15:39:16 #17 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 240000ms, CDB Data[hex]: 5B 00 02 00 00 00 00 00 00 00

15:39:16 #18 SCSI -1000 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

15:39:16 #19 CDR -1175 File Cdrdrv.cpp, Line 1137
Internal trace
Command timeout occured: timeout 240000ms, counter 0
CDB Data[hex]: 5B 00 02 00 00 00 00 00 00 00


15:39:16 #20 SCSI -26 File Cdrdrv.cpp, Line 1165
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

15:41:51 #21 CDR -1000 File ThreadedTransferInterface.cpp, Line 959
SCSI/IDE error

15:41:51 #22 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 959
Could not perform Fixation

15:41:51 #23 Phase 38 File dlgbrnst.cpp, Line 1426
Burn process failed at 4x (600 KB/s)

15:41:51 #24 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 10, size=37493 bytes, created 07/12/01 22:34:58
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (099), size=197884 bytes, created 27/03/01 02:50:00
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1039), size=20047 bytes, created 27/03/01 01:00:00
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 10/06/99 11:34:42
File 'IoSubsys\CDUDF.VXD': Ver=5.02 (155), size=134921 bytes, created 17/05/01 15:26:28
File 'IoSubsys\CDUDFRW.VXD': Ver=5.02 (155), size=155899 bytes, created 17/05/01 15:26:50
File 'IoSubsys\CDRPWD.VXD': Ver=5.02 (155), size=60419 bytes, created 17/05/01 15:27:30
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File 'IoSubsys\AFL.VXD': Ver=5.14, size=17052 bytes, created 14/08/01 08:34:06
File '..\System32\Drivers\1394bus.sys': Ver=4.10.2224, size=38016 bytes, created 11/10/99 16:57:18
File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2226, size=36720 bytes, created 28/06/00 12:11:28
File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 28/06/00 12:18:44
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 12/10/99 14:56:42
File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2226, size=36352 bytes, created 28/06/00 12:11:58
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2223, size=69602 bytes, created 14/01/00 09:37:42
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 17/11/99 17:36:48
File 'IoSubsys\ElbyCDIO.vxd': Ver=3, 2, 7, 1, size=15123 bytes, created 14/11/01 09:54:44[/B]

I have try all I can ! Write in 8 in 4 in 2 ..... with ISO, juste files, in an another hard drive ...... but nothing change !

this message are from an oldest nero version :

[B]Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22:22:00
Nero Version: 5.5.2.3
Recorder: <PLEXTOR CD-R PX-R820T> Version: 1.08 - HA 0 TA 0 - 5.5.2.3
Adapter driver: <symc8xx> HA 0
Drive buffer : 4096kB
CD-ROM: <PLEXTOR CD-ROM PX-40TS> Version: 1.13 - HA 0 TA 3 - 5.5.2.3
Adapter driver: <symc8xx> HA 0
PLEXTOR CD-R PX-R820T (Target 0, G: Autoinsert On, DMA ?, Disconnect On, SyncDataXfer Off
PLEXTOR CD-ROM PX-40TS (Target 3, H: Autoinsert On, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 0MB (28kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
29.1.2002

04:12:10 #1 Text 0 File Reader.cpp, Line 133
Reader running

04:12:10 #2 Text 0 File Writer.cpp, Line 125
Writer CD-R PX-R820T running

04:12:10 #3 ISO9660GEN -11 File geniso.cpp, Line 4210
First writeable address = 0 (0x00000000)

04:12:12 #4 Text 0 File ThreadedTransferInterface.cpp, Line 665
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 354007 (354007) = #354007/78:40.7
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

04:12:14 #5 Text 0 File Burncd.cpp, Line 1509
Recorder: PLEXTOR CD-R PX-R820T;
CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

04:12:14 #6 Text 0 File ThreadedTransferInterface.cpp, Line 800
Prepare recorder CD-R PX-R820T for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 725313536

04:12:14 #7 Text 0 File ThreadedTransferInterface.cpp, Line 828
Removed 2 run-out blocks from end of track 1.

04:12:14 #8 Text 0 File ThreadedTransferInterface.cpp, Line 665
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 354007 (354007) = #354007/78:40.7
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 354005 blocks [CD-R PX-R820T ]
--------------------------------------------------------------

04:12:14 #9 Phase 24 File dlgbrnst.cpp, Line 1353
Caching of files started

04:12:14 #10 Phase 25 File dlgbrnst.cpp, Line 1353
Caching of files completed

04:12:14 #11 Phase 28 File dlgbrnst.cpp, Line 1353
Speed measurement started

04:12:15 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1836
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

04:15:15 #13 Text 0 File ThreadedTransfer.cpp, Line 218
all writers idle, stopping conversion

04:15:16 #14 Phase 29 File dlgbrnst.cpp, Line 1353
Speed measurement completed: 24x (3638 KB/s)

04:15:16 #15 Phase 32 File dlgbrnst.cpp, Line 1353
Simulation started at 8x (1200 KB/s)

04:15:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1836
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

04:24:10 #17 SCSI -1135 File Cdrdrv.cpp, Line 1351
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x033489C8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data: 0x2A 0x00 0x00 0x04 0xCA 0xF4 0x00 0x00 0x1E 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x04 0xCB 0x8A 0x0A
0x00 0x00 0x00 0x00 0x0C 0x07

04:24:10 #18 mmc -1135 File Writer.cpp, Line 311
Write error

04:24:10 #19 Text 0 File ThreadedTransfer.cpp, Line 218
all writers idle, stopping conversion

04:24:10 #20 Text 0 File ThreadedTransfer.cpp, Line 212
conversion idle, stopping reader

04:24:10 #21 CDR -201 File WriterStatus.cpp, Line 121
Invalid writestate

04:24:10 #22 TRANSFER -18 File WriterStatus.cpp, Line 121
Could not perform EndTrack

04:24:10 #23 Phase 34 File dlgbrnst.cpp, Line 1353
Simulation failed at 8x (1200 KB/s)

04:24:10 #24 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 16, size=33451 bytes, created 29/01/02 03:53:16
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69578 bytes, created 05/05/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00[/B]


I have tested it on an another PC with better SCSI card, but there are nothing change !

My Plextor is out ?
Please help me
  #2  
Old Jan 29, 2002, 06:52 PM
Darkman Darkman is offline
suspended
 
Join Date: Aug 2000
Location: Australia
Posts: 6,424
Default

I'm no Code Monkey but here's what I gleaned from the Log file:

Check your burner settings, Sync Data Transfer should be enabled.
You are getting some sense key errors, have you installed any new burning software recently?, there may be a conflict.
Also there is a medium error, indicating either the media is faulty or that the burner is dirty.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tech Problem. (confusing) [Custom Built; ; win98SE] BIG_POPPA_PUMP Windows 98 12 Oct 12, 2003 05:56 AM
odd problem with liteon @bootup [generic pc ; ; win98SE] zardoz53 CD-R & CD-RW 3 Jun 19, 2003 08:26 PM
Strange Yamaha 4416s CD Burner Problem [; ; win98SE] schu CD-R & CD-RW 4 Jan 28, 2002 11:11 PM


All times are GMT -5. The time now is 07:34 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 1996-2009 CDROM-Guide.com. All rights reserved