CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Video Game Backup - PS2
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
  #1  
Old Nov 07, 2002, 11:49 AM
edmond edmond is offline
Senior Member
 
Join Date: Mar 2001
Location: aylesbury
Posts: 378
Question Trying to boot psx2 dvd with action reply 2 and Neo 2.2 no luck!! help

sponsored links

 
Trying to boot psx2 dvd with action reply 2 and Neo 2.2 no luck
i know theres about 1 million ways to do this
the most common seems the Dave Mirra Freestyle BMX2
but this does no appear on my action replay set up
wondered if someone might be able to help
  #2  
Old Nov 07, 2002, 12:14 PM
petemac petemac is offline
Veteran
 
Join Date: Jul 2001
Location: derby derbyshire england
Posts: 609
Default

ok mate this is how it works for me

first have the action replay in the ps2

1 press and hold in the power button ( until the action replay loads up)

2 press x on start game

3 when the next screen comes up pull down to without codes BUT DONT PRESS IT!!!!!!

4 press the eject button

5 replace the AR2 disc with an original game i use DEAD OR ALIVE 2

6 press eject again ( to close the tray )

7 wait for 10 seconds

8 let go of the power button and the tray will open now swap with the DVDR you want to boot up and press x when the tray cloes


PRESTO THE GAME BOOTS!!!!!!!!!!!!!!!!!!!!!!!!!!!


hope it helps
  #3  
Old Nov 07, 2002, 12:19 PM
deniro-s deniro-s is offline
Member
 
Join Date: Mar 2002
Posts: 174
Default

Are you using a boot disc? I use devil may cry demo and the armored core method. Which game codes you use doesn't actually matter, you just need to have enough codes turned on that you are asked to go back and turn some off....here's a quick description of the boot method.

1. Holding power button down turn on your ps2 (like the ea swap method)
2. After gameshark loads press eject and put in your boot disc (ie devil may cry original or demo)
3. Wait ~10 sec for the TOC to be read and select start game with codes (assuming the game codes are for armored core or dave mirra, with ~30 codes turned on, I think this is the limit for gameshark to give you that message)
4. You will then hear the disc stop spinning and gameshark will tell you to turn some codes off.
5. Go back to the start game menu, but this time select start game without codes.
6. Release the power button and 2-3 seconds later the tray should eject.
7. You then have ~5 seconds to swap in your game you want to play, and as the tray closes (it does this automatically) press X to start the game.

I hope this helps, but theres also tonnes of info out there on swap methods in the forums if you search.....
  #4  
Old Nov 07, 2002, 12:30 PM
fk1team fk1team is offline
Veteran
 
Join Date: Oct 2001
Posts: 1,554
Default

try these:

======================================



i have exact spec as urs but instead of ar2.02 ...i have ar2.01 (should be pretty much the same) anyway .. this method worked for me ...


"Load AR2v2 keeping Reset button pressed
Select Action Replay Codes
Highlight 'Dave Mirra Freestyle BMX2' Code
press START
press EJECT and insert Original-TOC-DVD and press EJECT to close
wait 10 Seconds
now press X on 'with Codes' and X once again
Error-Message appears: 'Too many Codes'
Original-TOC-DVD stops spinning
now release Reset-Button and insert DVD-R Backup
press X to confirm Error-Message
now press Circle twice to enter Mainmenu again
choose 'START GAME', 'without Codes' and then X to start
Codes are getting actualised and DVD-R boots"



================================================== ==========================
Before being able to boot DVDRs, you must first configure your PS2 by doing the following:
1. Place your GS2 v2 disc into the PS2 & press reset.
2. Select GameShark Codes, then press X.
3. Select Add New Game, then press X.
4. Press X a further 3 times. Each time, Updating Code List, Please Wait will be displayed.
5. Hold the reset button until it turns red.
This needs only be done once. Your PS2 is now ready to boot DVDRs by only needing to do the following:
1. Place your GS2 v2 disc into the PS2, then hold the reset button until it turns red.
2. Ask someone to press the reset button & keep it held in, until told to release it. After a few moments, the reset button will turn green & the GameShark main menu screen will be displayed.
3. Highlight the GameShark Codes, but do not press X yet.
4. Press eject & swap the GameShark disc for a demo disc that has a large size TOC.
5. Press eject once more to close the drawer, then wait 10 seconds.
6. Press X, then highlight New Games & press X once more.
7. New Code should already be highlighted, with either an empty box to it's left, or one with a tick in it.
8. Press X to add or remove the tick (it doesn't matter which), then press Start on your controller.
9. The screen should now say With Code/Without Code. Highlight With Code.
10. Ask the person helping you to let go of the reset button, whilst at the exact same time you begin pressing X continuously until the screen Updating Code List is displayed.
11. The drawer will open & you will have a short time to replace the demo disc with the DVDR, before the tray closes itself.
12. The screen will then go black for a while, & the game will load.
================================================== ================================


Report this post to a moderator | IP: Logged



02-24-2002 07:27 PM

KurtAngle
Senior Member

cheers m8,no lie this worked 1st time,am now enjoying mgs2

thanks m8 appreiate it



================================================== ===============







Here is the method everybody is talking about.
I haven't tried it but goodluck with it

i' ve got a scph30003R no mod-chip and action replay V2.1 and yes i'm playing MGS 2 on dvdr...how you ask,well here's how to do it.
boot up action replay,when on main screen put in devil may cry demo.
go into codes screen and add a new game (you can call it anything)
now add a new code with just zero's in it(you can call that anything).
repeat this 5 or 6 times then press circle and get back to the main screen.
devil may cry is still spinning.now select start game with codes and get ready because when you press x for the final time the disc stops spinning while the dongle updates codes.this gives you 5 seconds to do the swap trick and hey presto the dvdr boots straight up and away you go.
I presume i am the first to work this out, at least you don't need to mess about with 1.7 back-ups any more.



================================================== =======================
I have AR2V2 and Neo 2.2 and I can boot DVD-R backups.

Use the Dave Mirra method.

1. Load AR2 V2 and hold reset button
2. Select Action Replay Codes (still holding reset)
3. Highlight Dave Mirra Freestyle BMX2 code (still holding reset)
4. Press start (still holding reset)
5. Press eject and insert original DVD (DMC demo is good) (still holding reset)
6. Press Eject to close tray and wait about 10 seconds (still holding reset)
7. Press 'x' on Withcodes, then 'x' again (still holding reset)
8. Erros message appears 'Too many codes' (at this point you will hear the
disk stop spinnin')
9. Release reset button, tray opens, swap for backup.
10. Press x to confirm the error message
11. Press circle twice to return to main menu
12. Goto 'Start Game', 'Without codes' - press x
13. Game boots.

Hope it helps,

if you are still having problems, it may be that you have a Version 5 PS2 which supposedly has trouble booting DVD-R, try www.help-forums.com and go to the PS2Ownz DVD-R swap forum.

================================================== =======================




AR V2 , can u play PS2 DVDR with that ?
Hey guys, can u actually play DVD backup games with action replay Ver 2 ????



Report this post to a moderator | IP: Logged



02-02-2002 02:20 PM

padawan
Veteran

I know for a fact that with AR/GS V2.01 u can....

Here's the boot method:

1. Load AR2 v2.01
2. Select ACTIONREPLAY CODES, Press X
3. Select ADD NEW GAME, Press X
4. Press X (Updating Code List Please Wait)
5. Press X (Updating Code List Please Wait)
6. Press X (Updating Code List Please Wait)

You only have to do this once, Now you are ready to play DVD-R backups

1) Turn on the ps2 with AR2 2.01 (holding down the ON/RESET)
2) Select ACTIONREPLAY CODES (Still Holding ON/Reset)
3) Press EJECT (while still holding the ON/RESET button) and swapAR2 2.01 with DVD demo (DMC works well).
4) Press EJECT to close (Wait 10 seconds Still Holding ON/Reset)
5) Then Press X (Still Holding ON/Reset)
6) Make sure -–NEW GAME—is highlighted, Press X (Still Holding ON/Reset)
7) Select –New Code— (Still Holding ON/Reset)
8) Press X (Still Holding ON/Reset)*
9) Press Start (Still Holding ON/Reset)
10) Press X
11) You should now be on 'Start game with codes enabled. Insert disc and press X to start or press O to go back.' screen.
12) Release ON/Reset and press X at the same time, draw will open on its own
13) Put DVDR in and let the draw close itself. DVDR will now boot!

Works for me everytime, and I use GS2 V2.01....




================================================== =======================



Hi m8, I don't think it works with 1.6, but you can get a new action replay disc with dongle for £17.99 at ***********.play247.com

if you did get new AR you could try this

Some people have had problems booting a copied version of AR 1.7 so I
recommend you get AR 2.0.

Neo 2/2.2 with AR 1.7 or 1.9

This requires an original PS2 DVD and AR v1.7 or v1.9.
1) Turn on PS2 with AR 1.7/1.9 (holding down the ON/RESET).
2) Select Start Game (Still Holding ON/Reset).
3) Press EJECT (while still holding the ON/RESET button) and swap AR with
PS2 ORIGINAL DVD.
4) Press EJECT to close (Wait 10 seconds).
5) Then select WITHOUT CODES. Wait until disc stops.
6) Now let go of reset and the tray comes out, swap PS2 ORIGINAL DVD for a
back-up DVD-R and press X just as the tray starts to go back in
(IMPORTANT)!

Neo 2/2.2 with AR 2.0

This requires an original PS2 DVD and AR v2.
1) Load AR2 V2 keeping Reset button pressed
2) Select Action Replay Codes
3) Highlight Dave Mirra Freestyle BMX2 Code
4) Press START
5) Press EJECT and insert Original DVD
6) Wait 10 Seconds
7) Now press 'X' on 'With Codes' and 'X' once again
8) Error-Message appears: 'Too many Codes'
9) Original DVD stops spinning
10) Perform EA Trick (Release Reset), insert DVDR Backup
11) Press 'X' to confirm Error-Message
12) Now press Circle twice to enter Main Menu again
13) START GAME, without Codes, press 'X'
14) Codes are getting actualised
15) DVDR boots

Neo 4

This requires an original PS2 DVD.
1) Turn on the PS2 with no disk inserted and press X to get to browser
screen
2) Insert ORIGINAL DVD, close drawer with EJECT (while still holding
EJECT)
3) Wait until GOLD DISK appears on screen & release EJECT
4) Swap ORIGINAL DVD with DVDR - drawer will auto close after 5 seconds
5) Press X to start game

Without a Chip, with AR 1.7 or 1.9

This requires an original PS2 DVD and AR v1.7 or v1.9.
1) Load up Action Replay CD.
2) In the main menu, select 'Start Game'
3) Hit Eject and insert a "real" DVD game that is larger than the DVDr you
are going to play. Close the CDROM.
4) Now select 'With Codes' if you are going to be using cheats, or
'Without'
if you are not.
5) Now you should be a the 'Please Insert Game Disc' screen. Now perform
the
normal knife/tool swap.
6) Take out the DVD game and put in your game backup DVDr.
7) Use tool swap again to pull pin back to left.
8) Press X

Without a Chip, with AR 2.0

This requires an original PS2 DVD and AR v2.
1) Load AR2 V2
2) Select Action Replay Codes
3) Highlight Dave Mirra Freestyle BMX2 Code
4) Press START
5) Press EJECT and insert Original DVD
6) Wait 10 Seconds
7) Now press 'X' on 'With Codes' and 'X' once again
8) Error-Message appears: 'Too many Codes'
9) Original DVD stops spinning
10) Now perform swap trick & insert DVDR Backup
11) Press 'X' to confirm Error-Message
12) Now press Circle twice to enter Main Menu again
13) START GAME, without Codes, press 'X'
14) Codes are getting actualised
15) DVDR boots
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DVD Movies and DVD games no longer boot...v4 ps2...neo dvd key Haas5615 Video Game Backup - PS2 3 Feb 15, 2003 06:47 AM
How do you boot a DVD with a Neo 2.2 iceberg_is_on_fire Video Game Backup - PS2 10 Jan 20, 2003 03:24 PM
Neo 2.2 and Action Replay or Gameshark with some newer games............ ADAMANT Video Game Backup - PS2 3 Sep 27, 2002 05:58 AM
How to boot dvd silvers using neo 2.2? Yomayomi Video Game Backup - PS2 1 Jun 15, 2002 07:15 AM
How to boot CD/DVD backups using Neo2.x banzai_uk Video Game Backup - PS2 2 Jun 06, 2002 12:59 AM


All times are GMT -5. The time now is 03:18 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 1996-2009 CDROM-Guide.com. All rights reserved