Problem burning a DVD with a Pioneer DVD RW (DVDDevrypter+Instant Copy)
Hi,
I was testing a DVD writer and an error occured while copying the ISO file.
This is what I did:
- Passed all the original DVD files into the hard disk with DVD Decrypter
- Created an ISO file with InstantCopy (saved into the hard disk)
- Recorded the ISO file into the DVD-R disk (at 1x) with DVD Decrypter. The original DVD had little more than 3G.
In the last phase there was an error at 73%.
---
I/O Error!
Device: [1.0.0] Pioneer ...
ScsiStatus: 0x02
Interpretation: Check Condition
CDB (...)
Interpretation: Write(10) - Sectors: 1344 256 - 13 44271
Sense Area: (...)
Interpretation: Cannot Write Medium - Incompatible Format
--
(...) Stands for some codes; If you want I can write them as I screenshotted the error.
The DVD Writer is a Pioneer DVR-106. Supports the DVD-R format so I don't know why that "incompatible format" message is shown.
The disk was a Maxell DVD-R (came with the recorder).
--
After that I tested the disk dispite the error. The dvd writer does read it (altough it's probably not complete because the program stoped at 73%). My dvdrom doesn't read it (supports DVD-R), neither does the stand alone player (I think it supports DVD-R but I'm not sure).
So I wanted to know if anyone has an idea of why this error happened, and what should I do to prevent this in future copies.
One last thing, the original DVD was a R1 but my drives are all R2. Can the copying error be related to this?
Thanks in advance.
|
Linear Mode
