CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > CD-R & CD-RW
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


 
 
Thread Tools Display Modes
  #1  
Old Oct 06, 2004, 06:10 PM
G-nort G-nort is offline
Newbie
 
Join Date: Oct 2004
Posts: 4
Default cdrw optorite problem. please help.

sponsored links

 
this is an error log from opto. cdrw cw4801. i have been having this problem for a few days now and can't figure it out. i have removed and reinstalled the cdrw drive. i have reinstalled nero 6.3. i have used memorex and maxell cdrs. i have 6 error logs like this one. i have upgraded my firmware w/ no luck. i have changed settings on the device manager. all test and diagnostics say everything is working fine but i am still having problems.
the common errors are: scsi/atapi command timeout error or no seek error.
short description: the used read buffer goes to 100% and the disc burns 5%. there is a pause and then the buffer level kicks in. the buffer level goes up to 100%. from there it can either not continue to burn and i get one of the above error messages, or it will burn for a while and stop midway and then the error messages occur. thank you for whatever help i get.



error log:
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <OPTORITE CD-RW CW4801> Version: 210E - HA 0 TA 0 - 6.3.1.25
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <OPTORITE CD-RW CW4801 >Version: 210E - HA 0 TA 0 - 6.3.1.25
Adapter driver: <ESDI_506> HA 0
OPTORITE CD-RW CW4801 (Target 0, D: Autoinsert On, DMA On, Disconnect On, SyncDataXfer On
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490956kB)
Free physical memory: 7MB (7656kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.10.2004
CD-ROM (ISO)
5:38:35 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:38:35 PM #2 Phase 72 File dlgbrnst.cpp, Line 1855
BURN-Proof activated

5:38:35 PM #3 Text 0 File Reader.cpp, Line 126
Reader running

5:38:35 PM #4 Text 0 File Writer.cpp, Line 124
Writer OPTORITE CD-RW CW4801 running

5:38:35 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

5:38:35 PM #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

5:38:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 350719 ( 77:58.19)

5:38:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

5:38:35 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: OPTORITE CD-RW CW4801;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

5:38:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:38:35 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 350720 (350720) = #350720/77:56.20
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 350718 blocks [OPTORITE CD-RW CW4801 ]
--------------------------------------------------------------

5:38:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [OPTORITE CD-RW CW4801 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 718581760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
350720 | lead-out | 1 | 0x00 | 0x41

5:38:35 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 350720 -> 350718.

5:38:35 PM #14 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

5:38:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:38:35 PM #16 Text 0 File Mmc.cpp, Line 20660
Set BUFE: BURN-Proof -> ON

5:42:09 PM #17 Text 0 File Scsicmd.cpp, Line 1610
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 03 CF 60 00 00 20 00 00 00

5:42:09 PM #18 CDR -1175 File Cdrdrv.cpp, Line 1360
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x03 0xCF 0x60 0x00 0x00 0x20 0x00 0x00 0x00


5:42:09 PM #19 SCSI -26 File Cdrdrv.cpp, Line 1390
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02A40000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xCF 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

5:42:09 PM #20 SCSI -26 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02A40000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xCF 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

5:42:09 PM #21 CDR -26 File Writer.cpp, Line 304
SCSI/ATAPI command timeout error
OPTORITE CD-RW CW4801\H0 T0

5:42:10 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:42:10 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

5:42:21 PM #24 Text 0 File Scsicmd.cpp, Line 1610
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00

5:42:21 PM #25 SCSI -1000 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

5:42:21 PM #26 CDR -1175 File Cdrdrv.cpp, Line 1207
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00


5:42:21 PM #27 SCSI -26 File Cdrdrv.cpp, Line 1234
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

5:46:57 PM #28 CDR -1000 File WriterStatus.cpp, Line 193
SCSI/IDE error
OPTORITE CD-RW CW4801\H0 T0

5:46:57 PM #29 TRANSFER -18 File WriterStatus.cpp, Line 193
Could not perform EndTrack

5:46:57 PM #30 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
OPTORITE CD-RW CW4801\H0 T0

5:46:57 PM #31 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

5:46:57 PM #32 Text 0 File Mmc.cpp, Line 15480
<OPTORITECD-RW CW4801 > start Close Session

5:46:57 PM #33 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

5:46:57 PM #34 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error

5:46:57 PM #35 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

5:46:57 PM #36 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

5:46:57 PM #37 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

5:46:57 PM #38 Phase 39 File dlgbrnst.cpp, Line 1855
Burn process aborted


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 1/15/2004 7:26:42 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 1/15/2004 7:26:42 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 6/10/1999 11:34:42 AM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM

Registry Keys:
  #2  
Old Oct 06, 2004, 09:23 PM
Insomniac Insomniac is offline
Veteran
 
Join Date: Jul 2000
Location: Sydney, Australia. Where else would you want to live?
Posts: 5,746
Default

You've tried most of the obvious things like reinstalling etc.

One other thing I would try is your ASPI layer.

Try [url=***********.adaptec.com/worldwide/support/drivers_by_product.jsp?cat=%2fProduct%2fASPI-4.70][b]ADAPTEC[/b], if not, then go to Nero's site and download their ASPI.
  #3  
Old Oct 06, 2004, 10:51 PM
G-nort G-nort is offline
Newbie
 
Join Date: Oct 2004
Posts: 4
Default

Thanx but i still had no luck. with adaptec, i received a focus or tracking error. with nero aspi, i received a no seek error.

I am worried that the recorder is damaged. If you know how to read the error log, please tell me what it says. I have no clue what all that says.

what is pissing me off most is all the cd-rs i am wasting.

thank you again.
  #4  
Old Oct 07, 2004, 12:52 AM
Insomniac Insomniac is offline
Veteran
 
Join Date: Jul 2000
Location: Sydney, Australia. Where else would you want to live?
Posts: 5,746
Default

All the error log tells me unfortunately is that the burn wasn't successful. Not a great deal of help really.

To prevent wasting discs, try a simulation burn, verify the data burnt, and use CDRW's until you get this sorted.

If you can try this burner in another machine, and alternatively try another burner in your machine that would be of enormous help.

Also, try things like the Nero help tool and CD Speed etc in the Nero Toolkit.
  #5  
Old Oct 07, 2004, 04:42 PM
G-nort G-nort is offline
Newbie
 
Join Date: Oct 2004
Posts: 4
Default

thanx again insomniac.

i did all the pre-test: nero smart start, data transfer test, overburn test, and simulations. i even set the simulation burn to immediately go into the actual burn. the sim went fine and then the problem occurred again w/ the actual burn.

a month ago i was burning data cd and had no prob. this all occurred when i tried to burn audio. i even installed roxio w/out luck. i have uninstalled it since then cause i have read adaptec and ahead software don't co-exist well.

i removed incd because it has caused problems in the past w/ my other burner on my old comp. should i reinstall it? i will get some re-writables. thanx for the idea.

unfortunately, i only have 1 cdrw and am not computer literate enough w/ hardware to attempt switching cdrw w/ a friend. i don't want to **** it up. thanx for the idea. i will try to find someone who is more computer literate to make the move.

the cd-rom drive is working fine. it still reads cds. it is just the burner. i have e-mailed optorite for a little assistance. any more
help is greatly appreciated. thank you yet again insomniac for going above and beyond.
  #6  
Old Oct 07, 2004, 04:44 PM
G-nort G-nort is offline
Newbie
 
Join Date: Oct 2004
Posts: 4
Default

my apologies to the moderators and the board. i didn't know i couldn't curse on the board. i am sorry.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
new cdrw slower than old one ?? Senator CD-R & CD-RW 2 Jan 22, 2003 07:47 PM
artec cdrw problem busman1 CD-R & CD-RW 0 Jan 06, 2003 07:28 AM
InCD/WIndowsXP/Liteon 32x12x40 CDRW problem [Home Built; AMD; winXP] kk7x CD-R & CD-RW 7 Aug 11, 2002 06:08 PM
Going online a problem? butcher2 Video Game Backup - PS2 0 Jun 24, 2002 11:18 PM
Help! Problem with a Lite-On cdrw 24X10x40 fishfood CD-R & CD-RW 2 Jun 18, 2002 06:56 AM


All times are GMT -5. The time now is 09:40 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved