Quote:
Originally posted by wheelie
i had a problem with macro install=no dvd play back
now my problem is i have playback but the picture jumps all over the screen rolls round the screen and you only get half pic when it settles
the sound is there no probs with sound
Help please
Wheelie
|
The problem is with the 4 x 1 Kohm resistor component to which you installed the macro wires. You have accidentally burned the resistor.
There's two options you can do :
1. Try to fix it yourself (Not recommended, you'll have to be VERY GOOD in soldering)
2. Take it electronics repair shop, or someplace like that.
But if you chose option 1, then here's how to fix it.
As you can see it has only the first pair of resistor's connected, the second pair is a spare. You can suck the tin off the component and lift it off (You'll have to be VERY careful. Then you just turn the component so that the two spare resistor's get connected, and the burned one's go where the spares were. Sounds complicated but you'll know what I mean when you look at the component.
Another option is, that you don't use those resistor's at all, but get two 1 Kohm ceramic resistor's, non smd, and connect them. I had to fix mine with those normal resistor's as I burned the trace off completely.
Make sure you don't apply too much heat, or you'll end up burning the spare resistor's also. Best of luck, tell us how you managed to fix it.
Can anyone fix this :)
Re: Help dvd playback all messed up
Linear Mode
