CDROM-Guide forums

Go Back   CDROM-Guide forums > Main Forums > Open to All Computer Related Topics
FAQ Calendar Mark Forums Read
Open   CSec   Data   DevDrv   CoOp   Audio   CDRW   CDG   VCD   DVD   HD DVD   Mac   VGB   PS2   DC   Xbox  


Closed Thread
 
Thread Tools Display Modes
  #1  
Old May 13, 2002, 07:51 AM
salsaholik salsaholik is offline
Senior Member
 
Join Date: Dec 2001
Location: new york,ny
Posts: 321
Default what's difference between low level format and regular format

sponsored links

 
is there any such thing??plz let me know kinda confuse here
  #2  
Old May 13, 2002, 07:55 AM
ghettopimp ghettopimp is offline
Junior Member
 
Join Date: May 2002
Posts: 25
Default

the height is the difference
  #3  
Old May 13, 2002, 08:21 AM
salsaholik salsaholik is offline
Senior Member
 
Join Date: Dec 2001
Location: new york,ny
Posts: 321
Default

uummmmmmmmm...no. anyone else knows?
i heard that even if u regular format,this will still leave clusters stored in your hard drive, low-format doesn't.....something like that

Last edited by salsaholik; May 13, 2002 at 08:36 AM.
  #4  
Old May 13, 2002, 08:28 AM
CHR15 CHR15 is offline
Veteran
 
Join Date: Dec 2000
Location: UK
Posts: 1,619
Default

You asked for it!!

Quote:
[b]Low-Level Formatting[/b]

Low-level formatting is the process of outlining the positions of the tracks and sectors on the hard disk, and writing the control structures that define where the tracks and sectors are. This is often called a "true" formatting operation, because it really creates the physical format that defines where the data is stored on the disk. The first time that a low-level format ("LLF") is performed on a hard disk, the disk's platters start out empty. That's the last time the platters will be empty for the life of the drive. If an LLF is done on a disk with data on it already, the data is permanently erased (save heroic data recovery measures which are sometimes possible).

If you've explored other areas of this material describing hard disks, you have learned that modern hard disks are much more precisely designed and built, and much more complicated than older disks. Older disks had the same number of sectors per track, and did not use dedicated controllers. It was necessary for the external controller to do the low-level format, and quite easy to describe the geometry of the drive to the controller so it could do the LLF. Newer disks use many complex internal structures, including zoned bit recording to put more sectors on the outer tracks than the inner ones, and embedded servo data to control the head actuator. They also transparently map out bad sectors. Due to this complexity, all modern hard disks are low-level formatted at the factory for the life of the drive. There's no way for the PC to do an LLF on a modern IDE/ATA or SCSI hard disk, and there's no reason to try to do so.
Not strictly true, you CAN perform a Low Level Format, so long as you use the tools (software) designed Specifically for your Drive.



Quote:
[b]High-Level Formatting (Regular)[/b]

After low-level formatting is complete, we have a disk with tracks and sectors--but nothing written on them. High-level formatting is the process of writing the file system structures on the disk that let the disk be used for storing programs and data. If you are using DOS, for example, the DOS FORMAT command performs this work, writing such structures as the master boot record and file allocation tables to the disk. High-level formatting is done after the hard disk has been partitioned, even if only one partition is to be used. See here for a full description of DOS structures, also used for Windows 3.x and Windows 9x systems.

The distinction between high-level formatting and low-level formatting is important. It is not necessary to low-level format a disk to erase it: a high-level format will suffice for most purposes; by wiping out the control structures and writing new ones, the old information is lost and the disk appears as new. (Much of the old data is still on the disk, but the access paths to it have been wiped out.) Under some circumstances a high-level format won't fix problems with the hard disk and a zero-fill utility may be necessary.

Different operating systems use different high-level format programs, because they use different file systems. However, the low-level format, which is the real place where tracks and sectors are recorded, is the same.

Last edited by CHR15; May 13, 2002 at 08:32 AM.
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 02:08 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1996-2009 CDROM-Guide.com. All rights reserved